|
1008LS-103XJLC Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Chip Inductors - 1008LS (2520) | |||
|
Document 103-1
Chip Inductors â 1008LS (2520)
⢠Lower DCR than other 1008 inductors
⢠Ferrite construction for high current handling
⢠Inductance values: 1.0 â 100 µH
Request free evaluation samples by contacting Coilcraft
or visiting www.coilcraft.com.
â Part number1
â Inductance2
(µH)
1008LS-102XJL_ ââ 1.0 @ 7.9 MHz
1008LS-122XJL_ ââ 1.2 @ 7.9 MHz
1008LS-152XJL_ ââ 1.5 @ 7.9 MHz
1008LS-182XJL_ ââ 1.8 @ 7.9 MHz
1008LS-222XJL_ ââ 2.2 @ 7.9 MHz
1008LS-272XJL_ ââ 2.7 @ 7.9 MHz
1008LS-332XJL_ ââ 3.3 @ 7.9 MHz
1008LS-392XJL_ ââ 3.9 @ 7.9 MHz
1008LS-432XJL_ ââ 4.3 @ 7.9 MHz
1008LS-472XJL_ ââ 4.7 @ 7.9 MHz
1008LS-502XJL_ ââ 5.0 @ 7.9 MHz
1008LS-562XJL_ ââ 5.6 @ 7.9 MHz
1008LS-622XJL_ ââ 6.2 @ 7.9 MHz
1008LS-682XJL_ ââ 6.8 @ 7.9 MHz
1008LS-822XJL_ ââ 8.2 @ 7.9 MHz
1008LS-912XJL_ ââ 9.1 @ 7.9 MHz
1008LS-103XJL_ â 10 @ 7.9 MHz
1008LS-123XJL_ â 12 @ 2.5 MHz
1008LS-153XJL_ â 15 @ 2.5 MHz
1008LS-183XJL_ â 18 @ 2.5 MHz
1008LS-223XJL_ â 22 @ 2.5 MHz
1008LS-273XJL_ â 27 @ 2.5 MHz
1008LS-333XJL_ â 33 @ 2.5 MHz
1008LS-393XJL_ â 39 @ 2.5 MHz
1008LS-473XJL_ â 47 @ 2.5 MHz
1008LS-563XJL_ â 56 @ 2.5 MHz
1008LS-683XJL_ â 68 @ 0.79 MHz
1008LS-104XJL_ 100 @ 0.79 MHz
Percent â SRF min4
â tolerance
â Q min3
(MHz)
5
48 @â50 MHz
230
5
37 @â50 MHz
210
5
37 @â50 MHz
190
5
37 @â50 MHz
170
5
37 @â50 MHz
150
5
37 @â50 MHz
135
5
37 @â50 MHz
120
5
37 @â7.9 MHz
105
5
30 @ 7.9 MHz
85
5
32 @â7.9 MHz
90
5
25 @ 7.9 MHz
30
5
37 @â7.9 MHz
80
5
32 @ 7.9 MHz
75
5
37 @â7.9 MHz
70
5
37 @â7.9 MHz
65
5
37 @ 7.9 MHz
57
5
37 @â7.9 MHz
60
5
28 @ 2.5 MHz
38
5
34 @ 2.5 MHz
30
5
28 @ 2.5 MHz
26
5
20 @ 2.5 MHz
22
5
24 @ 2.5 MHz
12
5
22 @ 2.5 MHz
19
5
33 @ 2.5 MHz
26
5
20 @ 2.5 MHz
12
5
20 @ 2.5 MHz
8.0
5
14 @ 0.79 MHz
5.7
5
13 @ 0.79 MHz
4.5
â DCR max5
(Ohms)
0.62
0.68
0.76
0.84
1.10
1.28
1.46
1.56
1.70
1.68
2.20
1.82
2.50
2.00
2.65
2.90
2.95
3.30
3.70
4.00
6.14
6.45
7.00
10.0
10.7
10.0
13.5
20.5
â Irms6
(mA)
700
650
630
600
520
490
450
420
400
400
360
380
330
360
330
310
300
290
280
160
270
210
200
170
160
170
145
120
Color
â code7
Black
Red
Green
Gray
Red
Violet
Orange
White
Orange
Violet
Black
Blue
Red
Gray
Red
Brown
Black
Red
Green
Gray
Red
Violet
Orange
White
Violet
Blue
Gray
Black
1. When ordering, please specify termination and packaging codes:
1008LS-103XJLC
Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
E = Halogen free component. RoHS compliant silver-
palladium-platinum-glass frit terminations.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C=7â³ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B=Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D=13â³ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts per
full reel).
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/
HP 4286A impedance analyzer with Coilcraft-provided correlation pieces.
3. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test
fixture.
4. SRF measured using an Agilent/HP 8753D network analyzer with a
Coilcraft SMD-D fixture.
5. DCR measured on a Cambridge Technology Micro-ohmmeter.
6. Current that causes a 15°C temperature rise from 25°C. Because of
their open construction, these parts will not saturate.
7. Current production parts are marked with one dot. Prior production parts
were marked with three dots. Part marking does not indicate polarity.
8. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ before soldering.
Designerâs Kit C336 contains 10 of each stocked value
Core materialâCeramic/Ferrite
Environmentalâ RoHS compliant, halogen free optional
Terminationsâ RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weightâ 38.3 â 41.0 mg
Ambient temperatureâ â40°C to +85°C with Irms current, +85°C to
+100°C with derated current
Storage temperatureâ Component: â40°C to +100°C.
Tape and reel packaging: â40°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL)â +100 to +350 ppm/°C
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packagingâ 2000/7â³ reelâ Plastic tape: 8 mm wide, 0.3 mm thick,
4 mm pocket spacing, 2.0 mm pocket depth
PCB washingâ Tested with pure water or alcohol only. For other
solvents, see Doc787_PCB_Washing.pdf
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 103-1â Revised 01/21/13
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
|
▷ |