1008HT-R12TJLC Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Chip Inductor - 1008HT Series (2520)

Document 169-1
Chip Inductor – 1008HT Series (2520)
• Low-profile inductors are 60% the height of our other 1008
size parts.
• They feature high SRFs and very high Q factors.
Coilcraft Designer’s Kit C322 contains samples of all
5% inductance tolerance parts. To order, please contact
Coilcraft or order on-line at http://order.coilcraft.com.

 Part number¹
Inductance²
Percent  SRF min⁵
(nH)  tolerance³
 Q min⁴
(MHz)
1008HT-3N3TJL_   3.3 @ 250 MHz
5
1008HT-6N8TJL_   6.8 @ 250 MHz
5
1008HT-7N2TJL_   7.2 @ 250 MHz
5
1008HT-12NTJL_   12 @ 250 MHz
5
1008HT-15NTJL_   15 @ 250 MHz
5
65 @ 1500 MHz
70 @ 1500 MHz
70 @ 1500 MHz
55 @ 700 MHz
55 @ 700 MHz
7900
5500
4800
3800
2800
1008HT-18NTJL_   18 @ 250 MHz
1008HT-22NTJL_   22 @ 250 MHz
1008HT-27NT_L_   27 @ 250 MHz
1008HT-33NT_L_   33 @ 200 MHz
1008HT-39NT_L_   39 @ 200 MHz
5
55 @ 500 MHz
3000
5
55 @ 500 MHz
2600
5,2
55 @ 500 MHz
2400
5,2
55 @ 350 MHz
2000
5,2
55 @ 350 MHz
1900
1008HT-47NT_L_   47 @ 200 MHz
1008HT-56NT_L_   56 @ 150 MHz
1008HT-68NT_L_   68 @ 150 MHz
1008HT-82NT_L_   82 @ 150 MHz
1008HT-R10T_L_
100 @ 100 MHz
5,2,1
5,2,1
5,2,1
5,2,1
5,2,1
55 @ 350 MHz
50 @ 300 MHz
50 @ 300 MHz
40 @ 250 MHz
40 @ 250 MHz
1500
1500
1500
1300
1200
1008HT-R12T_L_
1008HT-R14T_L_
1008HT-R15T_L_
1008HT-R18T_L_
1008HT-R22T_L_
120 @ 100 MHz
140 @ 100 MHz
150 @ 100 MHz
180 @ 50 MHz
220 @ 50 MHz
5,2,1
5,2,1
5,2,1
5,2,1
5,2,1
40 @ 200 MHz
40 @ 200 MHz
40 @ 200 MHz
40 @ 200 MHz
34 @ 100 MHz
1090
1100
960
920
750
1008HT-R24T_L_
1008HT-R27T_L_
1008HT-R33T_L_
1008HT-R39T_L_
1008HT-R47T_L_
240 @ 50 MHz
270 @ 50 MHz
330 @ 25 MHz
390 @ 25 MHz
470 @ 25 MHz
5,2
32 @ 100 MHz
800
5,2
32 @ 100 MHz
770
5,2
32 @ 100 MHz
635
5,2
32 @ 100 MHz
555
5,2
32 @ 100 MHz
530
1008HT-R56T_L_
560 @ 25 MHz
5,2
32 @ 100 MHz
485
 DCR max⁶
(Ohms)
0.025
0.05
0.05
0.065
0.08
0.09
0.11
0.13
0.135
0.17
0.18
0.18
0.23
0.35
0.64
0.55
0.70
0.75
1.02
1.15
1.15
1.25
1.35
1.45
1.65
1.90
 Irms⁷
(mA)
1000
1000
1000
1000
1000
1000
950
850
760
700
660
620
550
500
420
350
320
300
250
250
250
250
250
250
240
240
1. When ordering, specify tolerance, termination and packaging codes:
1008HT-R56TJLC
Tolerance: F = 1%  G = 2%  J = 5%
(Table shows stock tolerances in bold.)
Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (7500 parts per full reel).
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/
HP 4286A impedance analyzer with Coilcraft-provided correlation
pieces.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test
fixture.
5. SRF measured using an Agilent/HP 8720D network analyzer and a
Coilcraft SMD­‑D test fixture.
6. DCR measured on a Cambridge Technology micro-ohmmeter and a
Coilcraft CCF840 test fixture.
7. Current that causes a 15°C temperature rise from 25°C ambient.
8. Electrical specifications at 25°C.
See Color Coding section for part marking data.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 169-1  Revised 01/18/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.