1008HS-391TJLC Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Chip Inductors - 1008HS (2520)

Document 160-1
Chip Inductors – 1008HS (2520)
Coilcraft “HS” series chip inductors have been designed
especially for the needs of today’s high frequency designer.
Their ceramic construction delivers the highest possible
SRF and excellent Q values. The non-magnetic coilform
also ensures the utmost in thermal stability, predictability
and batch consistency.

Part number¹
1008HS-100T_L_
1008HS-120T_L_
1008HS-150T_L_
1008HS-180T_L_
1008HS-220T_L_
1008HS-270T_L_
1008HS-330T_L_
1008HS-390T_L_
1008HS-470T_L_
1008HS-560T_L_
1008HS-680T_L_
1008HS-820T_L_
1008HS-101T_L_
1008HS-121T_L_
1008HS-151T_L_
1008HS-181T_L_
1008HS-221T_L_
1008HS-271T_L_
1008HS-331T_L_
1008HS-391T_L_
1008HS-471T_L_
1008HS-561T_L_
1008HS-621T_L_
1008HS-681T_L_
1008HS-751T_L_
1008HS-821T_L_
1008HS-911T_L_
1008HS-102T_L_
  _Inductance2
(nH)
10 @ 50 MHz
12 @ 50 MHz
15 @ 50 MHz
18 @ 50 MHz
22 @ 50 MHz
27 @ 50 MHz
33 @ 50 MHz
39 @ 50 MHz
47 @ 50 MHz
56 @ 50 MHz
68 @ 50 MHz
82 @ 50 MHz
100 @ 25 MHz
120 @ 25 MHz
150 @ 25 MHz
180 @ 25 MHz
220 @ 25 MHz
270 @ 25 MHz
330 @ 25 MHz
390 @ 25 MHz
470 @ 25 MHz
560 @ 25 MHz
620 @ 25 MHz
680 @ 25 MHz
750 @ 25 MHz
820 @ 25 MHz
910 @ 25 MHz
1000 @ 25 MHz
Percent ^  SRF min^{5  } DCR max^{6  } Irms⁷
  _tolerance3   _{Q min}4
(MHz)
(Ohms)
(mA)
5
50 @ 500 MHz
4100
0.08
1000
5
50 @ 500 MHz
3300
0.09
1000
5
50 @ 500 MHz
2500
0.10
1000
5
50 @ 350 MHz
2500
0.11
1000
5
55 @ 350 MHz
2400
0.12
1000
5,2
5,2
5,2
5,2,1
5,2,1
55 @ 350 MHz
60 @ 350 MHz
60 @ 350 MHz
65 @ 350 MHz
65 @ 350 MHz
1600
1600
1500
1500
1300
0.13
1000
0.14
1000
0.15
1000
0.16
1000
0.18
1000
5,2,1
5,2,1
5,2,1
5,2,1
5,2,1
65 @ 350 MHz
60 @ 350 MHz
60 @ 350 MHz
60 @ 350 MHz
45 @ 100 MHz
1300
1000
1000
950
850
0.20
1000
0.22
1000
0.56
650
0.63
650
0.70
580
5,2,1
45 @ 100 MHz
750
5,2,1
45 @ 100 MHz
700
5,2,1
45 @ 100 MHz
600
5,2,1
45 @ 100 MHz
570
5,2,1
45 @ 100 MHz
500
0.77
620
0.84
500
0.91
500
1.05
450
1.12
470
5,2,1
45 @ 100 MHz
450
5,2,1
45 @ 100 MHz
415
5,2,1
45 @ 100 MHz
375
5,2,1
45 @ 100 MHz
375
5,2,1
45 @ 100 MHz
360
1.19
470
1.33
400
1.40
300
1.47
400
1.54
360
5,2,1
45 @ 100 MHz
350
5,2,1
35 @ 50 MHz
320
5,2
35 @ 50 MHz
290
1.61
400
1.68
380
1.75
370
1. When ordering, specify tolerance, termination and packaging codes:
1008HS-102TGLC
Tolerance: F = 1%  G = 2%  J = 5%
(Table shows stock tolerances in bold.)
Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts per
full reel).
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP
4286A impedance analyzer with Coilcraft-provided correlation pieces.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test
fixture.
5. SRF measured using an Agilent/HP 8753D network analyzer and a
Coilcraft SMD-D test fixture.
6. DCR measured on a Cambridge Technology micro-ohmmeter and a
Coilcraft CCF840 test fixture.
7. Current that causes a 15°C temperature rise from 25°C ambient.
8. Electrical specifications at 25°C.
9. Temperature coefficient of inductance: +25 to +125 ppm/°C.
For part marking data, please visit http://www.coilcraft.com/colrcode.cfm.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 160-1  Revised 01/18/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.