0906-5JLB Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Micro Spring Air Core Inductors

Document 163-1
Micro Spring^™ Air Core Inductors
• Small air core inductors feature high Q and tight tolerances
• Acrylic jacket provides a flat top for pick and place
• Solder coated leads ensure reliable soldering
Terminations  RoHS compliant tin-silver over copper Other termina-
tions available at additional cost.
Weight  0906: 10 –12 mg; 1606: 18 – 27 mg
Ambient temperature  –40°C to +125°C with Irms current, +125°C
to +140°C with derated current
Storage temperature  Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL)  +5 to +70 ppm/°C
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging 0906: 500 per 7″ reel  Plastic tape:  8 mm wide,
0.3 mm thick, 4 mm pocket spacing, 1.5 mm pocket depth
1606: 500 per 7″ reel  Plastic tape:  12 mm wide, 0.3 mm thick,
4 mm pocket spacing, 1.6 mm pocket depth
PCB washing  Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
SRF DCR
Part
  _L2 _Percent  _Q4   _min5  _max6  _Irms7
  _number1 _{Turns (nH)  tol}3 _{min (GHz) (mOhm) (A)}
0906-2_L_ 2 1.65 10,5 100 10.0
0906-3_L_ 3 2.55 5,2,1 100 8.2
0906-4_L_ 4 3.85 5,2,1 100 7.5
0906-5_L_ 5 5.40 5,2,1 100 7.0
1606-6_L_ 6 5.60 5,2,1 100 6.5
4.0 1.6
5.0 1.6
6.0 1.6
8.0 1.6
9.0 1.6
1606-7_L_ 7 7.15 5,2,1 100 6.0 10 1.6
1606-8_L_ 8 8.80 5,2,1 100 6.0 12 1.6
1606-9_L_ 9 9.85 5,2,1 100 5.2 13 1.6
1606-10_L_ 10 12.55 5,2,1 100 4.6 14 1.6
1. When ordering, specify tolerance, termination and packaging codes:
1606-10GLC
Tolerance: F = 1%  G = 2%  J = 5%  K = 10%  (Table shows stock
tolerances in bold.)
Termination: L = RoHS compliant tin-silver (96.5/3.5) over copper.
Special order: T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape, 500 parts per full reel.
B = Less than full reel. In tape, but not machine-ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
2. Inductance measured at 800 MHz using Agilent/HP 4286 or equivalent
with a Coilcraft SMD-A fixture and correlation.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured at 800 MHz using an Agilent/HP 4291A with an Agilent/
HP 16193A test fixture or equivalents.
5. SRF measured using an Agilent/HP 8720D or equivalent with a Coilcraft
SMD-D fixture.
6. DCR tested on the Cambridge Technology Model 510 Micro-ohmmeter
or equivalent.
7. Current that causes a 15°C temperature rise from 25°C ambient.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Dimensions are in
inches
mm
Document 163-1  Revised 03/19/13
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.