0806SQ-5N5-L Datasheet, PDF (1/3 Pages) Coilcraft lnc. – Square Air Core Inductors

Document 617 -1
Square Air Core Inductors
• Excellent Q factors – up to 130
• Current handling as high as 4.4 Amps!
• 20 inductance values from 5.5 to 27 nH
• All values available in 2% tolerance
Designer’s Kit C424 contains 10 each of all 5% values;
Designer’s Kit C424-2 contains 10 each of all 2% values
Terminations RoHS compliant tin-silver over copper
Ambient temperature –40°C to +125°C with Irms current,
+125°C to +145°C with derated current
Storage temperature Component: –40°C to +125°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C
/ 85% relative humidity)
Mean Time Between Failures (MTBF) 1 billion hours
PCB washing Only pure water or alcohol recommended
Inductance² %
Part number¹ (nH)
tol³
0806SQ-5N5_L_ 5.5 5,2
0806SQ-6N0_L_ 6.0 5,2
0806SQ-8N9_L_ 8.9 5,2
0806SQ-12N_L_ 12.3 5,2
0806SQ-16N_L_ 15.7 5,2
0806SQ-19N_L_ 19.4 5,2
0807SQ-6N9_L_ 6.9 5,2
0807SQ-10N_L_ 10.2 5,2
0807SQ-11N_L_ 11.2 5,2
0807SQ-14N_L_ 13.7 5,2
0807SQ-17N_L_ 17.0 5,2
0807SQ-22N_L_ 22.0 5,2
0908SQ-8N1_L_ 8.1 5,2
0908SQ-12N_L_ 12.1 5,2
0908SQ-14N_L_ 14.7 5,2
0908SQ-17N_L_ 16.6 5,2
0908SQ-22N_L_ 21.5 5,2
0908SQ-23N_L_ 23.0 5,2
0908SQ-25N_L_ 25.0 5,2
0908SQ-27N_L_ 27.3 5,2
SRF DCR
Q⁴ typ⁵ max Irms⁶
typ (GHz) (mOhm) (A)
60 4.9
64 5.2
90 4.3
90 4.8
90 4.4
90 4.0
3.4 2.9
6.0 2.9
7.0 2.9
8.0 2.9
9.0 2.9
10.0 2.9
100 4.6
100 4.0
90 3.6
100 4.3
100 4.0
100 3.5
6.0 2.7
7.0 2.7
6.3 2.7
8.0 2.7
9.0 2.7
10.0 2.7
130 5.2
130 4.3
90 3.0
130 3.4
130 3.7
120 2.6
130 2.5
130 3.2
6.0 4.4
7.0 4.4
7.2 4.4
8.0 4.4
9.0 4.4
10.0 4.4
10.0 4.4
10.0 4.4
1. Please specify tolerance, termination and packaging codes:
0908SQ-27NGLC
Tolerance: G = 2%, J = 5% (Table shows stock tolerances in bold.)
Termination: L = RoHS compliant tin-silver (96.5/3.5) over copper.
Special order, added cost:
T = RoHS tin-silver-copper (95.5/4/0.5) over copper
or S = non-RoHS tin-lead (63/37) over copper.
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape.
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked.
2. Inductance measured at 400 MHz, 0.1 Vrms, 0 A using an Agilent/
HP 4287A LCR meter or equivalent with a Coilcraft SMD-A test
fixture and Coilcraft-provided correlation pieces.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured at 400 MHz using an Agilent/HP 4291A impedance
analyzer or equivalent.
5. SRF measured using an Agilent/HP 8753 network analyzer and a
Coilcraft SMD-D test fixture.
6. Current that causes a 20°C temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
© Coilcraft, Inc. 2009
Specifications subject to change without notice.
Please check our website for latest information. Document 617-1 Revised 10/27/09