0805PS Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Power Chip Inductors

Document 265-1
Power Chip Inductors – 0805PS Series
• Shielded power chip inductors
• Excellent current handling for a part this size
For new designs, we recommend the EPL2010,
EPL2014 or LPS3010 as an alternative to this series.
They all offer better current handling, lower DCR, lower
profile and a smaller footprint. We will continue to
manufacture and support the 0805PS.
Part
number¹
L²
±10%
(µH)
0805PS-102KL_ 1.0
0805PS-152KL_ 1.5
0805PS-272KL_ 2.7
0805PS-332KL_ 3.3
0805PS-392KL_ 3.9
0805PS-472KL_ 4.7
0805PS-562KL_ 5.6
0805PS-682KL_ 6.8
0805PS-103KL_ 10
0805PS-153KL_ 15
0805PS-223KL_ 22
0805PS-333KL_ 33
0805PS-473KL_ 47
0805PS-683KL_ 68
0805PS-823KL_ 82
0805PS-104KL_ 100
0805PS-124KL_ 120
0805PS-154KL_ 150
0805PS-224KL_ 220
0805PS-334KL_ 330
Q min³
at 1 MHz
21
21
21
21
21
21
21
21
21
21
25
25
25
28
30
32
32
32
32
32
DCR⁴
max
(Ohms)
0.14
0.18
0.35
0.50
0.74
0.85
0.91
1.37
1.51
2.04
2.48
3.00
3.85
4.42
6.00
6.96
7.51
8.33
13.71
20.53
SRF⁵
typ Isat⁶
(MHz) (A)
340 0.90
265 0.85
190 0.60
180 0.55
165 0.50
155 0.43
143 0.38
118 0.32
66 0.27
34 0.22
22 0.18
17 0.16
15 0.15
12 0.12
12 0.11
9.0 0.10
7.7 0.10
5.0 0.08
5.0 0.07
3.5 0.06
Irms⁷
(A)
1.6
1.3
0.88
0.70
0.61
0.59
0.57
0.46
0.43
0.34
0.33
0.28
0.26
0.24
0.21
0.19
0.18
0.18
0.14
0.11
1. When ordering, please specify termination and packaging codes:
0805PS-334KLC
Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (1500 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts per
full reel).
2. Inductance measured at 100 kHz, 0.1 Vrms, using a Coilcraft SMD-A
fixture in Agilent/HP 4263B LCR meter.
3. Q measured on an Agilent/HP 4291 with an Agilent/HP 16193 test
fixture.
4. DCR measured on a micro-ohmmeter and a Coilcraft CCF840 test
fixture.
5. SRF measured using an Agilent/HP 8753D network analyzer and a
Coilcraft SMD-D test fixture.
6. DC current at which the inductance drops 10% (typ) from its value
without current.
7. Current that causes a 40°C temperature rise from 25°C ambient.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
© Coilcraft, Inc. 2009
Specifications subject to change without notice.
Please check our website for latest information.
Document 265-1 Revised 08/18/09