0805LS-273XJLC Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Chip Inductors 0805LS

Document 288-1
Chip Inductors – 0805LS (2012)
These ferrite core surface mount inductors have lower
DCR and higher current ratings than our 0805CS Series.
They come in inductance values from 0.078 to 27 µH.
Coilcraft Designer’s Kit C354 contains samples of all
5% inductance tolerance parts.To order, contact Coilcraft
or visit http://order.coilcraft.com to purchase on-line.

Part number¹
  _Inductance2
(µH)
0805LS-78NX_L_
0805LS-111X_L_
0805LS-471X_L_
0.078 @ 7.9 MHz
0.110 @ 7.9 MHz
0.470 @ 7.9 MHz
0805LS-681X_L_
0.680 @ 7.9 MHz
0805LS-102X_L_    1.0 @ 7.9 MHz
0805LS-122X_L_    1.2 @ 7.9 MHz
0805LS-152X_L_    1.5 @ 7.9 MHz
0805LS-182X_L_    1.8 @ 7.9 MHz
0805LS-222X_L_    2.2 @ 7.9 MHz
0805LS-272X_L_    2.7 @ 7.9 MHz
0805LS-332X_L_    3.3 @ 7.9 MHz
0805LS-392X_L_    3.9 @ 7.9 MHz
0805LS-472X_L_    4.7 @ 7.9 MHz
0805LS-682X_L_    6.8 @ 7.9 MHz
0805LS-822X_L_    8.2 @ 2.5 MHz
0805LS-103X_L_   10.0 @ 2.5 MHz
0805LS-153X_L_   15.0 @ 2.5 MHz
0805LS-223X_L_   22.0 @ 2.5 MHz
0805LS-273X_L_   27.0 @ 2.5 MHz
Percent ^  SRF min^{4  } DCR max⁵
tolerance ^  Q min³
(MHz)
(Ohms)
5,2
19 @ 7.9 MHz
1440
5,2
19 @ 7.9 MHz
1200
5,2
19 @ 7.9 MHz
500
5,2
20 @ 7.9 MHz
400
5,2
20 @ 7.9 MHz
340
5,2
15 @ 7.9 MHz
280
5,2
20 @ 7.9 MHz
275
5,2
20 @ 7.9 MHz
246
5,2
20 @ 7.9 MHz
106
5,2
20 @ 7.9 MHz
105
5,2
20 @ 7.9 MHz
83
5,2
20 @ 7.9 MHz
52
5,2
20 @ 7.9 MHz
50
5,2
20 @ 7.9 MHz
35
5,2
18 @ 2.5 MHz
27
5,2
18 @ 2.5 MHz
21
5,2
18 @ 2.5 MHz
17
5,2
18 @ 2.5 MHz
13
5,2
15 @ 2.5 MHz
11
0.042
0.05
0.31
0.46
0.69
1.20
1.03
1.15
1.28
1.48
1.57
1.70
1.87
2.25
2.55
3.45
5.03
6.18
11.04
  _Irms6
(A)
2.0
2.0
0.720
0.590
0.500
0.400
0.490
0.410
0.365
0.350
0.330
0.300
0.280
0.260
0.250
0.200
0.180
0.150
0.120
Color
code
Black
Brown
Red
Orange
Yellow
Brown
Green
Blue
Brown
Violet
Gray
White
Black
Brown
Red
Orange
Yellow
Green
Blue
1. When ordering, specify tolerance, termination and packaging codes:
0805LS-273XJLC
Tolerance: G = 2%  J = 5%
(Table shows stock tolerances in bold.)
Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
E = Halogen free component. RoHS compliant silver-
palladium-platinum-glass frit terminations.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/
HP 4286A impedance analyzer with Coilcraft-provided correlation
pieces.
3. Q measured on an Agilent/HP 4291A with an Agilent/HP 16193 test
fixture.
4. SRF measured using an Agilent/HP 8753D network analyzer with a
Coilcraft SMD-D test fixture.
5. DCR measured on a Cambridge Technology Micro-ohmmeter.
6. Current that causes a 15°C temperature rise from 25°C ambient.
Because of their open construction, these parts will not saturate.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Core material Ceramic/Ferrite
Environmental  RoHS compliant, halogen free optional
Terminations  RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight  12.7 – 13.9 mg
Ambient temperature  –40°C to +85°C with Irms current, +85°C to
+100°C with derated current
Storage temperature  Component: –40°C to +100°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL)  +100 to +250 ppm/°C
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging  2000/7″reel; Plastic tape:  8 mm wide, 0.23 mm thick,
4 mm pocket spacing, 1.6 mm pocket depth
PCB washing  Only pure water or alcohol recommended
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 288-1  Revised 01/18/12
© Coilcraft Inc. 2012
This product may not be used in medical of high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.