0805HT-22NTJLC Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Chip Inductors - 0805HT (2012)

Document 168-1
Chip Inductors – 0805HT (2012)
At just 0.035″ high, these are one of our lowest profile
surface mount inductors. Their wire wound ceramic de-
sign provides tight tolerances, exceptional Q and high
SRF values.
Coilcraft Designer’s Kit C321 contains samples of all
5% parts shown as stocked. To order, contact Coilcraft
or visit http://order.coilcraft.com to purchase on-line.

Part number¹
0805HT-1N8TJL_
0805HT-2N0TJL_
0805HT-3N9TJL_
0805HT-4N3TJL_
0805HT-4N7TJL_
0805HT-5N1TJL_
0805HT-5N6TJL_
0805HT-6N8TJL_
0805HT-7N5TJL_
0805HT-8N2TJL_
0805HT-9N1TJL_
0805HT-10NT_L_
0805HT-12NT_L_
0805HT-15NT_L_
0805HT-18NT_L_
0805HT-20NT_L_
0805HT-22NT_L_
0805HT-27NT_L_
0805HT-33NT_L_
0805HT-39NT_L_
0805HT-47NT_L_
0805HT-56NT_L_
0805HT-68NT_L_
0805HT-82NT_L_
0805HT-R10T_L_
0805HT-R12T_L_
0805HT-R15T_L_
0805HT-R18T_L_
0805HT-R22T_L_
0805HT-R27T_L_
0805HT-R33T_L_
0805HT-R39T_L_
0805HT-R47T_L_
0805HT-R50T_L_
  _Inductance2
(nH)
1.8 @ 250 MHz
2.0 @ 250 MHz
3.9 @ 250 MHz
4.3 @ 250 MHz
4.7 @ 250 MHz
5.1 @ 250 MHz
5.6 @ 250 MHz
6.8 @ 250 MHz
7.5 @ 250 MHz
8.2 @ 250 MHz
9.1 @ 250 MHz
10 @ 250 MHz
12 @ 250 MHz
15 @ 250 MHz
18 @ 250 MHz
20 @ 250 MHz
22 @ 250 MHz
27 @ 250 MHz
33 @ 250 MHz
39 @ 250 MHz
47 @ 200 MHz
56 @ 200 MHz
68 @ 200 MHz
82 @ 150 MHz
100 @ 150 MHz
120 @ 150 MHz
150 @ 150 MHz
180 @ 150 MHz
220 @ 150 MHz
270 @ 150 MHz
330 @ 150 MHz
390 @ 100 MHz
470 @ 100 MHz
500 @ 50 MHz
Percent ^  SRF min^{5  } DCR max⁶
  _tolerance3
Q min⁴
(MHz)
(Ohms)
5
55 @ 1500 MHz
9400
0.030
5
55 @ 1500 MHz
11500
0.018
5
50 @ 1000 MHz
6100
0.055
5
80 @ 1000 MHz
6364
0.030
5
50 @ 1000 MHz
5500
0.060
5
45 @ 1000 MHz
6100
0.069
5
45 @ 1000 MHz
5800
0.091
5
50 @ 1000 MHz
4800
0.080
5
47 @ 1000 MHz
4600
0.082
5
50 @ 1000 MHz
4800
0.080
5
54 @ 1000 MHz
3900
5,2
55 @ 750 MHz
3300
5,2
55 @ 750 MHz
3800
5,2
50 @ 500 MHz
2950
5,2
50 @ 500 MHz
3100
0.105
0.080
0.10
0.10
0.13
5,2
50 @ 500 MHz
2700
0.17
5,2
50 @ 500 MHz
2900
0.15
5,2
50 @ 500 MHz
2450
0.19
5,2
55 @ 500 MHz
2350
0.19
5,2,1
55 @ 500 MHz
2200
0.27
5,2,1
50 @ 500 MHz
2000
0.30
5,2,1
50 @ 500 MHz
1850
0.39
5,2,1
50 @ 500 MHz
1500
0.40
5,2,1
50 @ 500 MHz
1500
0.44
5,2
50 @ 500 MHz
1200
0.64
5,2
40 @ 250 MHz
1150
0.68
5,2
40 @ 250 MHz
1050
0.80
5,2
40 @ 250 MHz
830
0.86
5,2
39 @ 150 MHz
820
1.29
5,2
33 @ 150 MHz
790
1.40
5,2
32 @ 150 MHz
730
1.93
5,2
30 @ 150 MHz
675
2.80
5,2
30 @ 150 MHz
610
3.10
5,2
20 @ 50 MHz
585
3.20
  _Irms7
(mA)
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
700
600
600
600
500
500
500
400
300
300
300
200
200
200
200
200
200
Color
Code
Black
Violet
Brown
White
Red
Blue
Gray
Orange
Black
Yellow
Red
Green
Blue
Violet
Gray
Yellow
White
Black
Brown
Red
Orange
Yellow
Green
Blue
Violet
Gray
White
Black
Orange
Yellow
Green
Blue
Violet
Gray
1. When ordering, specify tolerance, termination and packaging codes:
0805HT-R22TGLC
Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
Tolerance:
E = Halogen free component. RoHS compliant silver-
palladium-platinum-glass frit terminations.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
F = 1%  G = 2%  J = 5%
(Table shows stock tolerances in bold.)
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts per
full reel).
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP
4286A impedance analyzer with Coilcraft-provided correlation pieces.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test
fixture and on an Agilent/HP 8753D with a Coilcraft SMD-D test fixture.
5. SRF measured using an Agilent/HP 8720D network analyzer and a
Coilcraft SMD-D test fixture.
6. DCR measured on a Cambridge Technology micro-ohmmeter and a
Coilcraft CCF858 test fixture.
7. Current that causes a 15°C temperature rise from 25°C ambient.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 168-1  Revised 01/18/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.