0805CS-030XJBC Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Chip Inductors

Document 100-1
Chip Inductors – 0805CS (2012)
• Exceptional Q values, even at high frequencies
• Tight tolerances – 2% for most; 1% for some values
• Wirewound construction provides the highest SRFs in 0805
size

  _{Part number}1
0805CS-020XJL_
0805CS-3N0XJL_
0805CS-030XJL_
0805CS-050XJL_
0805CS-060XJL_
0805CS-070XJL_
0805CS-080X_L_
0805CS-100X_L_
0805CS-120X_L_
0805CS-150X_L_
0805CS-180X_L_
0805CS-220X_L_
0805CS-240X_L_
0805CS-270X_L_
0805CS-330X_L_
0805CS-360X_L_
0805CS-390X_L_
0805CS-430X_L_
0805CS-470X_L_
0805CS-560X_L_
0805CS-680X_L_
0805CS-820X_L_
0805CS-910X_L_
0805CS-101X_L_
0805CS-111X_L_
0805CS-121X_L_
0805CS-151X_L_
0805CS-181X_L_
0805CS-221X_L_
0805CS-241X_L_
0805CS-271X_L_
0805CS-331X_L_
0805CS-391X_L_
0805CS-471X_L_
0805CS-561X_L_
0805CS-681X_L_
0805CS-821X_L_
  _Inductance2
(nH)
2.8 @ 250 MHz
3.0 @ 250 MHz
3.3 @ 250 MHz
5.6 @ 250 MHz
6.8 @ 250 MHz
7.5 @ 250 MHz
8.2 @ 250 MHz
10 @ 250 MHz
12 @ 250 MHz
15 @ 250 MHz
18 @ 250 MHz
22 @ 250 MHz
24 @ 250 MHz
27 @ 250 MHz
33 @ 250 MHz
36 @ 250 MHz
39 @ 250 MHz
43 @ 200 MHz
47 @ 200 MHz
56 @ 200 MHz
68 @ 200 MHz
82 @ 150 MHz
91 @ 150 MHz
100 @ 150 MHz
110 @ 150 MHz
120 @ 150 MHz
150 @ 100 MHz
180 @ 100 MHz
220 @ 100 MHz
240 @ 100 MHz
270 @ 100 MHz
330 @ 100 MHz
390 @ 100 MHz
470 @ 50 MHz
560 @ 25 MHz
680 @ 25 MHz
820 @ 25 MHz
Percent ^  SRF typ^{5  }DCR max^{6  } Irms⁷
  _tolerance3   _{Q min}4
(MHz)
(Ohms)
(mA)
5
80 @ 1500 MHz
12200
0.06
800
5
65 @ 1500 MHz
12200
0.06
800
5
50 @ 1500 MHz
12200
0.08
600
5
65 @ 1000 MHz
5900
0.08
600
5
50 @ 1000 MHz
5600
0.11
600
5
50 @ 1000 MHz
4800
0.14
600
5,2
50 @ 1000 MHz
4400
0.12
600
5,2
60 @ 500 MHz
4300
0.10
600
5,2
50 @ 500 MHz
4000
0.15
600
5,2
50 @ 500 MHz
3200
0.17
600
5,2
50 @ 500 MHz
3100
0.20
600
5,2
55 @ 500 MHz
2600
0.22
500
5,2
50 @ 500 MHz
2400
0.22
500
5,2
55 @ 500 MHz
2580
0.25
500
5,2,1
60 @ 500 MHz
2150
0.27
500
5,2,1
55 @ 500 MHz
1900
0.27
500
5,2,1
60 @ 500 MHz
2000
0.29
500
5,2,1
60 @ 500 MHz
1800
0.34
500
5,2,1
60 @ 500 MHz
1700
0.31
500
5,2,1
60 @ 500 MHz
1600
0.34
500
5,2,1
60 @ 500 MHz
1500
0.38
500
5,2,1
65 @ 500 MHz
1330
0.42
400
5,2,1
65 @ 500 MHz
1330
0.48
400
5,2,1
65 @ 500 MHz
1250
0.46
400
5,2
50 @ 250 MHz
1100
0.48
400
5,2,1
50 @ 250 MHz
1100
0.51
400
5,2,1
50 @ 250 MHz
920
0.56
400
5,2,1
50 @ 250 MHz
920
0.64
400
5,2
50 @ 250 MHz
820
0.70
400
5,2
44 @ 250 MHz
770
1.00
350
5,2
48 @ 250 MHz
730
1.00
350
5,2
48 @ 250 MHz
650
1.40
310
5,2
48 @ 250 MHz
600
1.50
290
5,2
33 @ 100 MHz
375
1.76
250
5,2
23 @ 50 MHz
330
1.90
230
5,2
23 @ 50 MHz
310
2.20
190
5,2
23 @ 50 MHz
310
2.35
180
Color
code
Gray
White
Black
Orange
Brown
Green
Red
Blue
Orange
Yellow
Green
Blue
Gray
Violet
Gray
Orange
White
Yellow
Black
Brown
Red
Orange
Black
Yellow
Brown
Green
Blue
Violet
Gray
Red
White
Black
Brown
Violet
Orange
Green
Blue
1. When ordering, specify tolerance, termination and packaging codes:
0805CS-821XGLC
Tolerance: F = 1%  G = 2%  J = 5%
(Table shows stock tolerances in bold.)
Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
E = Halogen free component. RoHS compliant silver-
palladium-platinum-glass frit terminations.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts per
full reel).
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/
HP 4286A impedance analyzer with Coilcraft-provided correlation
pieces.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test
fixture.
5. SRF measured using an Agilent/HP 8720D network analyzer and a
Coilcraft SMD­‑D test fixture.
6. DCR measured on a Cambridge Technology micro-ohmmeter and a
Coilcraft CCF858 test fixture.
7. Current that causes a 15°C temperature rise from 25°C ambient.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 100-1  Revised 01/11/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.