0604HQ Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Chip Inductors

Document 285-1
CChhipipInIndduucctotorsrs--00660044SHMQSSeries(1610)
• Combines the exceptionally high Q of an air core inductor
with the rugged construction of a ceramic body component.
• Provides intermediate inductance values not available in
Coilcraft’s 0603, 0402 or 0906 product families
Request free evaluation samples by contacting Coilcraft
or visiting www.coilcraft.com.
Part number¹
0604HQ-1N1XJL_
0604HQ-2N6XJL_
0604HQ-4N5XJL_
0604HQ-5N0XJL_
0604HQ-6N8XJL_
0604HQ-7N6XJL_
0604HQ-10NXJL_
Inductance²
(nH)
1.15
2.6
4.5
5.0
6.8
7.6
10.4
Percent
tolerance³
5
5
5
5
5
5
5
Q
900 MHz
min⁴ L typ Q typ
25 1.2 40
45 2.6 78
50 4.5 103
60 4.9 106
60 6.9 101
60 7.4 109
60 10.6 103
1.7 GHz
L typ Q typ
1.2 136
2.6 163
4.7 155
5.2 178
7.4 172
7.9 137
11.5 160
SRF DCR
min⁵ max⁶ Irms⁷ Color
(GHz) (Ohms) (A) code
12.3 0.021 3.0 Black
9.3 0.026 2.0 Brown
5.8 0.032 1.8 Red
5.3 0.032 1.6 Orange
4.7 0.035 1.8 Yellow
4.4 0.035 1.5 Green
4.1 0.037 1.5 Blue
1. When ordering, please specify termination and packaging codes:
0604HQ-10NXJLC
Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
2. Inductance measured at 500 MHz using a Coilcraft SMD-A fixture in an
Agilent/HP 4286 impedance analyzer with Coilcraft-provided correlation
pieces.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured at 500 MHz using an Agilent/HP 4291A with an Agilent/
HP 16193 test fixture.
5. For SRF less than 6 GHz, measured using an Agilent/HP 8753D network
analyzer and a Coilcraft SMD-D test fixture. For SRF greater than 6 GHz,
measured using an Agilent/HP 8722ES network analyzer and a Coilcraft
SMD-D test fixture.
6. DCR measured on a Cambridge Technology micro-ohmmeter and a
Coilcraft CCF858 test fixture.
7. Current that causes a 15°C temperature rise from 25°C ambient.
8. Electrical specifications at 25°C.
9. Temperature coefficient of inductance: +25 to +125 ppm/°C.
See Qualification Standards section for environmental and test data.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Designer’s Kit C351 contains 10 each of all values
Core material Ceramic
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 4.6 – 5.6 g
Ambient temperature –40°C to +125°C with Irms current, +125°C
to +140°C with derated current
Storage temperature Component: –40°C to +140°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +25 to +126 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging 2000 per 7″reel; Plastic tape: 8 mm wide, 0.23 mm thick,
4 mm pocket spacing, 1.27 mm pocket depth
PCB washing Only pure water or alcohol recommended
© Coilcraft, Inc. 2009
Specifications subject to change without notice.
Please check our website for latest information.
Document 285-1 Revised 10/06/08