0603USB Datasheet, PDF (1/2 Pages) Coilcraft lnc. – USB 3.0 Common Mode Choke

Document 406-1
USB 3.0 Common Mode Choke 0603
• Designed for high-speed USB 3.0, HDMI, SATA, IEEE1394 and
LVDS applications; data rates up to 4.8 Gbit/s.
• Miniature EIA 0603 footprint; only 1.07 mm tall
• Most values provide >15 dB common mode attenuation and
>100 ohms impedance.
Designer’s Kit C384 contains 10 of each value and all values of our
1206USB and 0805USB
Core material Ferrite
Environmental  RoHS compliant, halogen free
Terminations  Gold over nickel over silver-palladium-glass frit
Ambient temperature  –40°C to +85°C with Irms current, +85°C to
+105°C with derated current
Storage temperature  Component: –40°C to +105°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
PCB washing  Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf
^{Common mode Common mode
impedance typ (Ohms) attenuation typ (dB)}
Part number¹
100 MHz 500 MHz 1 GHz 100 MHz 500 MHz 1 GHz
0603USB-251ML_
25
44
64
0603USB-601ML_
60
99
142
0603USB-951ML_
95
156
234
0603USB-142ML_
145
242
353
0603USB-222ML_
225
384
592
1.31
3.16
8.45
3.00
6.88 13.27
4.62
9.75 16.06
6.85 12.80 18.16
9.14 16.53 20.29
  _Inductance2   _{DCR max}3 _{Isolation  Irms}4
min (nH) (Ohms) (Vrms) (mA)
18
0.077
37
0.109
63
0.142
98
0.174
150
0.209
250 500
250 500
250 500
250 500
250 500
1. When ordering, please specify packaging code:
0603USB-222MLC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (7500 parts per full reel).
2. Inductance measured at 100 MHz using an Agilent/HP 4286A imped-
ance analyzer and a Coilcraft SMD-A fixture.
3. DCR is specified per winding.
4. Current per winding that causes a 20°C rise from 25°C ambient.
5. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
0.060 ±0.003
1,52 ±0,076
1
2
0.042 ±0.004
1,07 ±0,10
4
3
0.004
0,10
0.013 0.034
0,33 0,86
1
4
2
0.030 ±0.003
0,76 ±0,076
3
0.023 0.030
0,58 0,73
2
1
0.010
0,25
0.010
0,25
Dimensions are in
inches
mm
3
4
Recommended
Land Pattern
0.012
0,30
Weight  4.9 – 5.2 mg
Packaging  2000 per 7″reel; 7500 per 13″ reel;  Plastic tape:  8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 1.14 mm pocket depth
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 406-1  Revised 07/20/10
© Coilcraft Inc. 2014
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.