0603PS Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Power Chip Inductors

Document 266-1
Power Chip Inductors – 0603PS Series
• Shielded power chip inductors
• Excellent current handling for a part this size
For new designs, we recommend the EPL2010,
EPL2014 or LPS3010 as an alternative to this series.
They all offer better current handling, lower DCR and
a lower profile. The EPL series also offers a smaller
footprint. We will continue to manufacture and support
the 0603PS.
Part
number¹
L ±10%² Q min³
(µH) at 1 MHz
0603PS-781KL_ 0.78 15
0603PS-102KL_ 1.0
15
0603PS-182KL_ 1.8
15
0603PS-222KL_ 2.2
15
0603PS-272KL_ 2.7
15
0603PS-332KL_ 3.3
15
0603PS-392KL_ 3.9
15
0603PS-472KL_ 4.7
15
0603PS-562KL_ 5.6
15
0603PS-682KL_ 6.8
15
0603PS-822KL_ 8.2
20
0603PS-103KL_ 10
20
0603PS-153KL_ 15
20
0603PS-223KL_ 22
20
0603PS-333KL_ 33
20
0603PS-473KL_ 47
20
DCR⁴
max
(Ohms)
0.24
0.26
0.54
0.75
0.75
0.88
1.00
1.08
1.23
1.37
1.43
1.60
1.92
2.96
5.63
5.69
SRF⁵
typ
(MHz)
475
390
155
245
127
72
72
64
51
39
30
30
22
16
12
12
Isat⁶
(A)
0.55
0.40
0.39
0.33
0.33
0.32
0.27
0.26
0.25
0.23
0.22
0.21
0.16
0.13
0.10
0.10
Irms⁷
(A)
1.30
1.00
0.70
0.60
0.55
0.50
0.48
0.47
0.41
0.40
0.39
0.38
0.35
0.27
0.20
0.18
1. When ordering, please specify termination and packaging codes:
0603PS-473KLC
Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (7500 parts per full reel).
2. Inductance measured at 100 kHz, 0.1 Vrms, using a Coilcraft SMD-A
fixture in an Agilent/HP 4263B LCR meter.
3. Q measured on an Agilent/HP 4291 with an Agilent/HP 16193 test
fixture.
4. DCR measured on a micro-ohmmeter and a Coilcraft CCF840 test
fixture.
5. SRF measured using an Agilent/HP 8753D network analyzer and a
Coilcraft SMD-D test fixture.
6. DC current at which the inductance drops 10% (typ) from its value
without current.
7. Current that causes a 40°C temperature rise from 25°C ambient.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
© Coilcraft, Inc. 2009
Specifications subject to change without notice.
Please check our website for latest information.
Document 266-1 Revised 08/17/09