0603LS-332XJLB Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Chip Inductors – 0603LS (1608)

Document 264-1
Chip Inductors – 0603LS (1608)
• Higher inductance values than other 0603 inductors
• Ferrite construction for high current handling
• Inductance values: 47 nH – 22 µH; 5% and 2% tolerance
Typical L vs Frequency
100000
10000
1000
100
8200 nH
3300 nH
1000 nH
330 nH
100 nH
Designer’s Kit C347 contains 10 each of all 5% values
Core material  Ceramic/Ferrite
Environmental  RoHS compliant, halogen free optional
Terminations  RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight  4.8 – 6.2mg
Ambient temperature  –40°C to +85°C with Irms current, +85°C to
+100°C with derated current
Storage temperature  Component: –40°C to +100°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL)  +50 to +150 ppm/°C
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging  2000 per 7″ reel.  Plastic tape: 8 mm wide, 0.23 mm thick,
4 mm pocket spacing, 1.17 mm pocket depth
PCB washing  Only pure water or alcohol recommended
10
1
10
100
1000
Frequency (MHz)
Typical Q vs Frequency
35
30
25
8200 nH
20
1000 nH
100 nH
15
3300 nH _{330 nH}
10
Irms Derating
120
110
100
90
80
70
60
50
40
30
20
10
0
-40 -20
0
20
40
60
80
Ambient temperature (°C)
100 120
5
0
0.1
1
10
100
Frequency (MHz)
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 264-1  Revised 01/18/12
© Coilcraft Inc. 2012
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.