0603HP-R12XGLU Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Chip Inductors – 0603HP Series

Document 537 -1
Chip Inductors – 0603HP Series (1608)
• Higher Q and lower DCR than other 0603 inductors
• Highest SRF values – as high as 16 GHz
• Excellent current handling capability – up to 2100 mA
• 54 inductance values from 1.8 to 390 nH
Typical Q vs Frequency
160
140
10 nH
120
100
24 nH
80
51 nH
60
82 nH
150 nH
40
330 nH
20
0
10
100
1000
Frequency (MHz)
10000
Current Derating
120
110
100
90
80
70
60
50
40
30
20
10
0
-40 -20
0
20 40 60 80 100
Ambient temperature (°C)
B
overall
F
A
G
C
D
Pick and
place
I
material
J
120 140
H
F
I
Typical L vs Frequency
1000
100
10
330 nH
150 nH
82 nH
51 nH
24 nH
10 nH
1
10
100
1000
10000
Frequency (MHz)
E
terminal
Terminal wraparound:
approx 0.01/0,24 both ends
Recommended
Land Pattern
A
B
C 
max (min – max) max D E F G H I J
0.069 0.034 – 0.043 0.037 0.015 0.029 0.013 0.038 0.040 0.027 0.028 inches
1,75 0,86 – 1,09 0,94 0,38 0,74 0,33 0,96 1,02 0,69 0,71 mm
Note: Height dimension (C) is before optional solder application. For maximum
height dimension including solder, add 0.006 in / 0,152 mm.
Core material Ceramic
Environmental  RoHS compliant, halogen free optional
Terminations  RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight  2.0 – 3.2 mg
Ambient temperature  –40°C to +125°C with Irms current, +125°C
to +140°C with derated current
Storage temperature  Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL)  +25 to +125 ppm/°C
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging  2000 per 7″ reel. Paper tape: 8 mm wide, 1 mm thick,
4 mm pocket spacing
PCB washing  Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 537-1  Revised 03/25/13
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.