|
0603HL Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Chip Inductors | |||
|
Document 894-1
Chip Inductors â 0603HL Series (1608)
⢠Higher inductance values than other 0603 inductors
⢠Inductance range: 330 nH â 3.3 µH
Part number1
âInductance2
±5% (nH)
0603HL-331XJR_ â 330 @ 25 MHz
0603HL-391XJR_ â 390 @ 25 MHz
0603HL-471XJR_ â 470 @ 25 MHz
0603HL-511XJR_ â 510 @ 25 MHz
0603HL-561XJR_ â 560 @ 25 MHz
0603HL-681XJR_ â 680 @ 25 MHz
0603HL-821XJR_ â 820 @ 25 MHz
0603HL-102XJR_
1000 @ 25 MHz
0603HL-122XJR_
1200 @ 25 MHz
0603HL-152XJR_
1500 @ 25 MHz
0603HL-182XJR_
0603HL-222XJR_
0603HL-272XJR_
0603HL-332XJR_
1800 @ 25 MHz
2200 @ 25 MHz
2700 @ 25 MHz
3300 @ 25 MHz
âQâtyp3
13 @ 25 MHz
13 @ 25 MHz
12 @ 25 MHz
12 @ 25 MHz
12 @ 25 MHz
12 @ 25 MHz
14 @ 25 MHz
14 @ 25 MHz
14 @ 25 MHz
15 @ 25 MHz
16 @ 25 MHz
16 @ 25 MHz
16 @ 25 MHz
18 @ 25 MHz
âSRF typ4 â DCR max5
(MHz)
(Ohms)
420
0.970
400
1.05
200
1.15
340
1.20
330
1.35
310
1.80
290
2.45
250
2.80
230
3.20
190
4.10
180
5.30
165
5.90
150
7.00
135
9.10
âIrms6
(mA)
330
330
300
300
300
260
190
190
180
150
140
130
120
110
Color
code
Violet
Gray
White
Black
Brown
Red
Orange
Yellow
Green
Blue
Violet
Gray
White
Black
1. When ordering, please specify termination and packaging code:
0603HL-332XJRC
Termination: R = RoHS compliant matte tin over nickel over silver-
platinum-glass frit
Special order: Q = RoHS tin-silver-copper (95.5/4/0.5)
or P = non-RoHS tin-lead (63/37).
Packaging: C = 7â³ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
2. Inductance measured at 0.1Vrms, using a Coilcraft SMD-A fixture in
Agilent/HP 4287A impedance analyzer or equivalent with Coilcraft-
provided correlation pieces.
3. Q measured using a Coilcraft SMD-A fixture in Agilent/HP 4287A
impedance analyzer or equivalent.
4. SRF measured using Agilent/HP 8753D network analyzer with Coilcraft
SMDâD test fixture.
5. DCR measured on Cambridge Technology Micro-ohmmeter or
equivalent.
6. Current that causes a 15°C temperature rise from 25°C ambient. This
information is for reference only and does not represent absolute
maximum ratings.
7. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ before soldering.
Designerâs Kit C449 contains 10 of each value
Core materialâCeramic
Environmentalâ RoHS compliant without exemption, halogen free
Terminationsâ RoHS compliant matte tin over nickel over silver-plati-
num-glass frit. Other terminations available at additional cost.
Weightâ 3.2 â 4.4 mg
Ambient temperatureâ â40°C to +125°C with Irms current
Maximum part temperatureâ +140°C (ambient + temp rise).
Storage temperatureâ Component: â40°C to +140°C.
Tape & reel packaging: â40°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL)â +50 to +150 ppm/°C
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packagingâ 2000 per 7â³ reel.â Plastic tape: 8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 1.0 mm pocket depth
PCB washingâ Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Document 894-1â Revised 10/12/15
|
▷ |