0603HC-7N5XJLW Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Chip Inductors - 0603HC (1608)

Document 218-1
HIGH ^CURRENT
Chip Inductors – 0603HC (1608)
With their high current ratings and ultra-small size, these
chip inductors are ideal for today’s high frequency, low
voltage applications like mobile phones. They feature
continuous current ratings up to 2.4 Amps DC and
will handle transient currents up to 50% higher. At low
inductance values, their Q factors are also higher than
our 0603CS Series.

^  Inductance² Percent
Q
900 MHz
1.7 GHz
Part number¹
(nH) ^  tolerance^{3  } min⁴ L typ  Q typ L typ  Q typ
0603HC-1N6XJL_
1.6
5
0603HC-3N6XJL_
3.6
5
0603HC-3N9XJL_
3.9
5
0603HC-6N8XJL_
6.8
5
0603HC-7N5XJL_
7.5
5
24
1.67 49
1.65 63
24
3.65 70
3.75 90
25
3.74 70
3.90 90
35
6.72 70
7.10 75
38
7.33 70
7.90 68
0603HC-10NX_L_
10
0603HC-12NX_L_
12
0603HC-15NX_L_
15
0603HC-18NX_L_
18
0603HC-22NX_L_
22
5,2
38
9.70 73 10.5 57
5,2
38 12.3 68 14.5 41
5,2
38 15.5 65 17.6 40
5,2
40 19.5 62 25.0 40
5,2
42 24.0 61 31.5 26
0603HC-24NX_L_
24
0603HC-33NXJL_
33
0603HC-47NXJL_
47
5,2
42 25.8 55 35.0 21
5
47 34.3 50 —
—
5
40 49.5 45 —
—
SRF
  _min5
(MHz)
12500
5900
5900
5800
3700
3700
3000
2800
2800
2400
2400
1900
1530
DCR
  _max6   _Irms7 _Color
(Ohms) (A) code
0.030
0.048
0.054
0.054
0.059
2.4 Black
2.3 Brown
2.2 Red
2.1 Orange
2.1 Yellow
0.071
0.075
0.080
0.099
0.099
2.0 Green
2.0 Blue
1.9 Violet
1.9 Gray
1.8 White
0.105
0.175
0.195
1.8 Black
0.95 Brown
0.85 Red
1. When ordering, specify tolerance, termination and packaging codes:
0603HC-24NXJLW
Tolerance: G = 2%  J = 5% (Table shows stock tolerances in bold.)
Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
E = Halogen free component. RoHS compliant silver-
palladium-platinum-glass frit terminations.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: W = 7″ machine-ready reel. EIA-481 punched paper tape
(2000 parts per full reel).
U = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter W instead.
2. Inductance measured at 250 MHz using Coilcraft SMD-A fixture in
Agilent/HP 4286 impedance analyzer with Coilcraft-provided correla-
tion pieces.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured at 250 MHz using Agilent/HP 4291A with Agilent/
HP 16193 test fixture.
5. SRF measured using Agilent/HP 8720D network analyzer and Coil-
craft SMD-D test fixture.
6. DCR measured on micro-ohmmeter and Coilcraft CCF858 test fixture.
7. Current that causes a 20°C temperature rise from 25°C ambient.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Designer’s Kit C339 contains 10 of each of all 5% parts
Core material Ceramic
Environmental  RoHS compliant, halogen free optional
Terminations  RoHS compliant silver-palladium-platinum-glass frit.
Weight  3.3 – 3.7 mg
Ambient temperature  –40°C to +125°C with Irms current, +125°C to
+145°C with derated current
Storage temperature  Component: –40°C to +145°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL)  +25 to +125 ppm/°C
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging  2000 per 7″ reel.  Paper tape: 8 mm wide, 1.0 mm thick,
4 mm pocket spacing
PCB washing  Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 218-1  Revised 09/30/13
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.