0402AF_12 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Chip Inductors

Document 422-1
Chip Inductors – 0402AF Series (1005)
• Higher inductance values than other 0402 inductors
• Ferrite construction for high current handling
• 23 inductance values from 20 nH to 560 nH

  _{Part number}1
0402AF-200XJL_
0402AF-220XJL_
0402AF-330XJL_
0402AF-360XJL_
0402AF-390XJL_
0402AF-510XJL_
0402AF-560XJL_
0402AF-720XJL_
0402AF-780XJL_
0402AF-101XJL_
0402AF-141XJL_
0402AF-181XJL_
0402AF-201XJL_
0402AF-221XJL_
0402AF-251XJL_
0402AF-271XJL_
0402AF-301XJL_
0402AF-331XJL_
0402AF-361XJL_
0402AF-391XJL_
0402AF-421XJL_
0402AF-471XJL_
0402AF-561XJL_
  _Inductance2
±5% (nH)
20
22
33
36
39
51
56
72
78
100
140
180
200
220
250
270
300
330
360
390
420
470
560
Impedance typ (Ohms)
900 MHz   1.7 GHz
83
118
96
146
142
207
157
249
173
263
218
330
239
360
311
453
344
522
513
850
629
832
1110
1050
1230
949
1270
1890
1560
1940
1320
1550
1850
1920
2350
1960
2230
2880
2640
2970
2270
2680
3620
2800
3010
3110
  _{SRF typ}3
(MHz)
2600
2500
2300
2300
2200
1930
1900
1650
1600
1400
1220
1150
1000
1150
900
860
860
820
810
760
700
650
600
  _{DCR max}4
(Ohms)
0.050
0.065
0.060
0.075
0.115
0.070
0.095
0.100
0.130
0.160
0.260
0.280
0.440
0.530
0.360
0.550
0.410
0.560
0.575
0.750
0.700
0.730
0.920
  _Irms5
(mA)
1600
1300
1400
1300
830
1100
1000
1000
970
900
630
560
400
380
520
360
420
350
360
300
340
310
200
1. When ordering, please specify termination and packaging codes:
0402AF-561XJLW
Termination: L = RoHS compliant gold over nickel over silver-palladi-
um-glass frit.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: W = 7″ machine-ready reel. EIA-481 punched paper
tape (2000 parts per full reel).
Q = 7″ machine-ready reel. EIA-481 punched paper
tape (5000 parts per full reel).
U = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter W instead.
2. Inductance measured at 7.9 MHz, 0.1 Vrms, using an Agilent/HP
4286A LCR meter or equivalent with a Coilcraft SMD-F test fixture and
Coilcraft-provided correlation pieces.
3. SRF measured using Agilent/HP 8753D network analyzer and Coilcraft
SMD­‑D test fixture.
4. DCR measured on Cambridge Technology micro-ohmmeter and a
Coilcraft CCF858 test fixture.
5. Current that causes a 15°C temperature rise from 25°C ambient.
Because of their open construction, these parts will not saturate.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Designer’s Kit C397 contains 20 each of all values
Core material Ferrite
Terminations  RoHS compliant gold over nickel over silver-palladium-
glass frit. Other terminations available at additional cost.
Weight  0.9 – 1.1 mg
Ambient temperature  –40°C to +85°C with Irms current, +85°C to
+100°C with derated current
Storage temperature  Component: –40°C to +100°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL)  +25 to +150 ppm/°C
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging  2000 or 5000 per 7″ reel.  Paper tape: 8 mm wide,
0.68 mm thick, 2 mm pocket spacing
PCB washing  Only pure water or alcohol recommended
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 422-1  Revised 12/17/12
© Coilcraft Inc. 2012
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.