|
CMX7031 Datasheet, PDF (60/82 Pages) CML Microcircuits – Full Audio-band Processing | |||
|
◁ |
The Two-Way Radio Processor
CMX7031/CMX7041
Guidelines for using the RF Synthesisers
ï· RF input slew rate (dv/dt) should be 14 V/µs minimum.
ï· The RF Synthesiser 2.5V digital supply can be powered from the VDEC output pin.
ï· RF clock sources and other, different clock sources must not share common IC components, as this
may introduce coupling into the RF. Unused ac-coupled clock buffer circuits should be tied off to a dc
supply, to prevent them oscillating.
ï· It is recommended that the RF Synthesisers are operated with maximum gain Iset (ie. Iset tied to
RFVss).
ï· The loop filter components should be optimised for each VCO.
ï£ 2013 CML Microsystems Plc
Page 60
D/7031/41_FI1.x/13
|
▷ |