EV6120 Datasheet, PDF (4/28 Pages) CML Microcircuits – For CMX612 Product Evaluation

Evaluation Kit for CMX612
1.2 Preliminary Information
1.2.1 Laboratory Equipment
The following laboratory equipment is needed to use this evaluation kit:
1.2.1.1 8 - 24V DC Power Supply.
1.2.1.2 Caller ID Simulator
1.2.1.3 Speech Source
EV6120
If the user wishes to control the EV6120 from a PC and/or re-program a new PIC on the board.
1.2.1.4 An IBM compatible PC; 20MHz '386 or better, running Microsoft Windows™ 3.11 / '95 /NT. The re-
programming software supplied (PICPROGB.EXE) runs most efficiently under DOS and cannot be
used with Windows NT.
1.2.2 Handling Precautions
Like most evaluation kits, this product is designed for use in laboratory environments. The following
practices will help ensure its proper operation.
1.2.2.1
Static Protection
This product uses low power CMOS circuits which may be damaged by electrostatic discharge.
Partially damaged circuits may function erroneously, leading to misleading results. Observe ESD
precautions at all times when handling this product.
1.2.2.2 Contents - Unpacking
Please ensure that you have received all of the items listed on the separate information sheet
(EK6120) and notify CML within 7 working days if the delivery is incomplete.
1.2.3
Approvals
This Evaluation Kit is not approved for direct or indirect connection to any public
telecommunication system. Users are advised to observe local statutory requirements which
may apply to this product.
© 2000 Consumer Microcircuits Limited
4
UM6120/1