EV6020 Datasheet, PDF (4/13 Pages) CML Microcircuits – Evaluation Kit User Manual

Evaluation Kit User Manual for FX602
EV6020
1.2 Preliminary Information
1.2.1 Laboratory Equipment
The following laboratory equipment is needed to use this evaluation kit:
1.2.1.1 8 - 35V DC Power Supply.
1.2.1.2 Telephone Line Simulator and Line Signal Generator.
1.2.1.3 A µC control board (such as a CML EV6000, which contains the PIC 16LC74JW (or similar) µC),
together with firmware and a user interface.
1.2.2 Handling Precautions
Like most evaluation kits, this product is designed for use in office and laboratory environments. The
following practices will help ensure its proper operation.
1.2.2.1 Static Protection
This product uses low power CMOS circuits which may be damaged by electrostatic discharge.
Partially damaged circuits may function erroneously, leading to misleading results. Observe ESD
precautions at all times when handling this product.
1.2.2.2 Contents - Unpacking
Please ensure that you have received all of the items listed on the separate information sheet
(EK6020) and notify CML within 7 working days if the delivery is incomplete.
1.2.3 Telephone Line Connection
This Evaluation Kit is not approved for direct or indirect connection to any public
telecommunication system. Users are advised to observe local statutory requirements which
may apply to this product.
© 1996 Consumer Microcircuits Limited
4
UM6020/4