English
Language : 

DE70321 Datasheet, PDF (1/4 Pages) CML Microcircuits – Development and Demonstration Kit
Product Preview
DE70321
Development and Demonstration Kit
September 2007/2
. . . . . . for the CMX7032 Marine AIS Class B Processor IC
Features
• Class B AIS Transceiver Technology
Demonstrator
• Designed to meet IEC62287
• 2 Watt Tx operation
• Dual, independent GMSK receivers
• C-BUS Interface to host µC
Features (Continued)
• 19.2MHz Reference for 9600bps data
rate
• Dual Channel Rx-only operation
• On-board EEPROM
• RS232 NMEA-0183 Interface for host-
less operation
• Flexibility built on FirmASIC® technology
Brief Description
The DE70321 is a complete AIS Class B (IEC 62287) technology demonstrator aimed at speeding
manufacturers' design and development of AIS Class B and AIS receiver products using the CMX7032 AIS
Class B Baseband Processor with RF Synthesiser IC. The design is a flexible platform to allow users to
configure and evaluate with two build options:
o Class B Transceiver (using CMX7032 FI-1.x)
o Dual Channel Rx-only (using CMX7032 FI-2.x)
The default board configuration is for dual channel receive on 161.975MHz (AIS channel 1) and
162.025MHz (AIS channel 2) with 25kHz channel spacing and 9600bps over-air data rate. An EEPROM is
included which can automatically load the Function Image™ FI-2.x into the CMX7032 at power-up. Received
data is automatically provided as NMEA 0183-HS sentences at 38,400bps from the DB9 RS232 port.
Function Image™ FI-1.x allows full host control over all CMX7032 functions whereas Function Image™
FI-2.x automatically programs the CMX7032 RF synthesisers to the correct frequencies.
All necessary RF circuits, such as VCOs, a 2 watt PA, harmonic filter, antenna switching and LNA, are
provided on the DE70321 to facilitate easy evaluation and demonstration of the design as a Class B unit. A
C-BUS interface is provided for control of the CMX7032 by a host microcontroller (required to perform the
higher level protocol functions on a Class B implementation).
The design is production engineered for low cost, with minimum number of component types and values
and uses only low-cost off-the-shelf components.
© 2007 CML Microcircuits
1/4