CM1974 Datasheet, PDF (1/1 Pages) Chicago Miniature Lamp,inc – T-3 Special Service Halogen Lamp

T-3 Special Service Halogen Lamp
CONFIGURATION
.497
.500
MAX.
.285
LCL
.836
MAX.
.2 50
..2 85
LCL
.497
.500
MAX.
.901
.2 47
S E E COMME NTS
S E CT ION
S E E COMME NTS
S E CT ION
A
B
All dimensions in inches.
Description:
These industry standard Halogen Lamps are used in a variety of applications from Aircraft Navigation lights to Medical work lights.
The unique compact design, rugged construction and exceptionally high light output make these lamps the ideal light source for
many applications.
Part No.
CM1974
CM1974D
CM1962
CM1962B
CM1962DZ
CM1962DX
CM1962TY
Design
Volts
6.0
6.0
8.5
8.5
8.5
8.5
8.5
Design
Watts
20
20
62
62
62
62
62
Filament
Shape
C-6
C-6
C-6
C-6
C-6
C-6
C-6
Nominal MSCP
Laboratory
Life Hours
Configuration
Comments
10
10000
B
3" Bare Leads
10
10000
A
3" Bare Leads
110
50
B
3" Bare Leads
110
50
B
9" Teflon Insulated
80
150
A
12" Teflon Insulated
80
150
A
4" Bare Leads
110
50
B
4" Teflon Insulated
Materials:
Globe:
Base:
Lead Connections:
Lead Wires:
Atmosphere:
Quartz Glass
Brass Special Bayonet
Brazed
18 AWG Bare or Teflon Insulated
Gas
Caution:
These halogen cycle lamps may shatter if scratched or damaged. Use these lamps in fixtures designed for their high operating temperature. Always turn power off when changing
these lamps. For satisfactory performance limit the seal and wire lead temperature to 350°C to avoid deterioration. Maintain a minimum lamp wall temperature of 250°C to assure
the halogen cycle occurs. Remove all grease and fingerprints from these lamps before operation. Never exceed the design voltage of these lamps.
America:
CML Innovative Technologies,Inc.
147 Central Avenue
Hackensack -NJ 07601 -USA
Tel:[phone]
Fax:[phone]
e-mail:[e-mail]
Europe:
CML Technologies GmbH &Co.KG
Robert-Bunsen-Str.1
67098 Bad Dürkheim -GERMANY
Tel:[phone]
Fax:[phone]
e-mail:[e-mail]
Asia:
CML Innovative Technologies,Inc.
61 Aida Street
Singapore 459975
Tel:[phone]
e-mail:[e-mail]
CML-IT reserves the right to make specification revisions that enhance the design and/or performance of the product