CM6500B Datasheet, PDF (22/36 Pages) C-Media Electronics – USB Audio Sound Chip

CM6500 / CM6500B
USB Audio Sound Chip
(Get_Report) (Rpt Type + Rpt (Interface) (16 bytes)
ID)
*Note: The Start_Addr value in the input reported is put in the Internal Register Address 0xff.
Software must set the value of Start_Addr Register to make sure Get Input Report can read the
proper data you want.
Input Data Format:
byte 0
byte1
byte2
byte3
byte4
byte5
byte6
byte7
byte8
byte9
byte10
byte11
byte12
byte13
byte14
byte15
always 1 for org HID event report ID
for defined HID event, and each event occupies one bit
start address of returned data (H-start_addr)
start address of returned data (L-start_addr)
bit7
bit6:UART_INT
bit5:GPI_INT
bit4:SPIS_INT(slavemode int)
bit3: SPIM_INT(mastermode int)
bit2:I2CS_INT(slavemode int)
bit1:I2CM_INT(mastermode int)
bit0: IR_INT
read data of [start_addr]
read data of [start_addr+1]
read data of [start_addr+2]
read data of [start_addr+3]
read data of [start_addr+4]
read data of [start_addr+5]
read data of [start_addr+6]
read data of [start_addr+7]
read data of [start_addr+8]
read data of [start_addr+9]
7.2.3 HID Set_Output_report
Command Format:
www.cmedia.com.tw
Copyright © C-Media Electronics Inc.
Rev. 1.02 ︱ Page 22/16