PLA171PH Datasheet, PDF (6/6 Pages) Clare, Inc. – Single-Pole Normally Open OptoMOS Relay

PLA171PH
PLA171PH
MECHANICAL DIMENSIONS
Surface Mount Package
2.540 ± 0.127
(0.100 ± 0.005)
2.159 TYP.
(0.085 TYP.)
6.350 ± 0.127
(0.250 ± 0.005)
9.398 ± 0.127 ^{7.620 ± 0.254}
(0.370 ± 0.005) ^{(0.300 ± 0.010)}
2.286 MAX.
(0.090 MAX.)
0.635 ± 0.127
(0.025 ± 0.005)
8.077 ± 0.127
(0.318 ± 0.005)
9.652 ± 0.381
(0.380 ± 0.015)
2.159 ± 0.025
(0.085 ± 0.001)
0.203
(0.008)
Recommended PCB Land Pattern
7.62
(0.30)
8.70
(0.3425)
1.55
(0.0610)
0.65
(0.0255)
2.54
(0.10)
0.457 ± 0.076
(0.018 ± 0.003)
Dimensions
mm
(inches)
PLA171PH Tape & Reel
Tape & Reel Packaging
330.2 DIA.
(13.00 DIA.)
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
Embossed Carrier
Embossment
W = 16.30 max
(0.642 max)
Top Cover
Tape
1
8
Bo = 10.30
(0.406)
K₀ = 2.70
(0.106)
K₁ = 2.00
(0.079)
P = 12.00
(0.472)
Ao = 10.30
(0.406)
User Direction of Feed
Dimensions
mm
(inches)
NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2
For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of
Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability,
fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental
damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-PLA171PH-R02
©Copyright 2010, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
6
8/10/2010