CPC5622 Datasheet, PDF (18/18 Pages) Clare, Inc. – LITELINK® III Phone Line Interface IC (DAA)

7.2 Tape and Reel Packaging
CPC5622
Figure 18. Tape and Reel Dimensions
Tape and Reel Packaging for 32-Pin SOIC Package
330.2 Dia
(13.00 Dia)
B =10.70 ± 0.15
0
(0.421 ± 0.006)
Top Cover
Tape Thickness
0.102 Max
(0.004 Max)
Top Cover
Tape
W=16.00 ± 0.30
(0.630 ± 0.012)
Embossed
Carrier
Embossment
K₀=3.20 ± 0.15
(0.126 ± 0.006)
K₁=2.70 ± 0.15
(0.106 ± 0.006)
P=12.00
(0.472)
User Direction of Feed
A₀=10.90 ± 0.15
(0.429 ± 0.006)
Dimensions
mm
(inches)
NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2
7.3 Soldering
7.3.1 Moisture Reflow Sensitivity
Clare has characterized the moisture reflow sensitivity
of this package, and has determined that this
component must be handled in accordance with
IPC/JEDEC standard J-STD-033 moisture sensitivity
level (MSL), level 3 classification.
7.3.2 Reflow Profile
For proper assembly, the component must be
processed in accordance with the current revision of
IPC/JEDEC standard J-STD-020. Failure to follow the
recommended guidelines may cause permanent
damage to the device resulting in impaired
performance and/or a reduced lifetime expectancy.
7.4 Washing
Clare does not recommend ultrasonic cleaning or the
use of chlorinated solvents.
Pb
RoHS
2002/95/EC
e3
For additional information please visit www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses or indemnity are expressed or implied. Except as set
forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty relating to its
products, including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized, or warranted for use as components in systems intended for surgical implant into
the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a
person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-CPC5622 - R02
Copyright © 2008, Clare, Inc.
LITELINK^® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
10/10/08
18