CPC1580 Datasheet, PDF (11/11 Pages) Clare, Inc. – Optically Isolated Gate Drive Circuit

CPC1580
7. Manufacturing Information
7.1 Soldering
7.2 Washing
For proper assembly, the component must be
processed in accordance with the current revision of
IPC/JEDEC standard J-STD-020. Failure to follow the
recommended guidelines may cause permanent
damage to the device resulting in impaired
performance and/or a reduced lifetime expectancy.
Clare does not recommend ultrasonic cleaning or the
use of chlorinated hydrocarbons.
7.3 Mechanical Dimensions
8 Pin Flatpack Package
2.540 ± 0.127
(0.100 ± 0.005)
2.159 TYP.
(0.085 TYP.)
6.350 ± 0.127
(0.250 ± 0.005)
9.398 ± 0.127
(0.370 ± 0.005)
7.620 ± 0.254
(0.300 ± 0.010)
2.286 MAX.
(0.090 MAX.)
0.635 ± 0.127
(0.025 ± 0.005)
8.077 ± 0.127
(0.318 ± 0.005)
9.652 ± 0.381
(0.380 ± 0.015)
2.159 TYP.
(0.085 TYP.)
0.203
(0.008)
0.457 ± 0.076
(0.018 ± 0.003)
7.4 Tape and Reel Specification
Tape and Reel Packaging for 8 Pin Flatpack Package
330.2 DIA.
(13.00 DIA.)
Recommended PCB Land Pattern
0.65
(0.0255)
2.54
(0.10)
8.70
(0.3425)
1.55
(0.0610)
Dimensions
mm
(inches)
W = 16.30 max
(0.642 max)
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
Top Cover
Tape
1
8
Bo = 10.30
(0.406)
Embossed Carrier
Embossment
K₀ = 2.70
(0.106)
K₁ = 2.00
(0.079)
P = 12.00
(0.472)
Ao = 10.30
(0.406)
User Direction of Feed
Dimensions
mm
(inches)
NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2
For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and
product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale,
Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for
a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental
damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-CPC1580-R00G
©Copyright 2007, Clare, Inc.
All rights reserved. Printed in USA.
8/17/07
11