PD1201 Datasheet, PDF (1/4 Pages) Clare, Inc. – AC Solid State Relays

PD1201
AC Solid State Relays
AC Operating
Voltage
Load Current
On-State
Voltage Drop
PD1201
120
1
1.2
Units
V_RMS
A
V_RMS
(A_T I_L = IA)
Features
• Load Current up to 1A
• Blocking Voltage to 400V
• 5mA Sensitivity
• Zero-Crossing Detection
• DC Control, AC Output
• Optically Isolated
• TTL and CMOS Compatible
• Low EMI and RFI Generation
• High Noise Immunity
• VDE compatible
• Machine Insertable, Wave Solderable
Applications
• Programmable Control
• Process Control
• Power Control Panels
• Remote Switching
• Gas Pump Electronics
• Contractors
• Large Relays
• Solenoids
• Motors
• Heaters
Description
The PD1201 is an AC Solid State Switch using optical
coupling with dual power SCR outputs to produce an
alternative to optocoupler and Triac circuits. The PD1201
switches are robust enough to provide a blocking voltage
of up to 400V and max surge current rating of 20A. In
addition, tightly controlled zero cross circuitry ensures
switching of AC loads without the generation of tran-
sients. The input and output circuits are optically coupled
to provide 3750V of isolation and noise immunity
between control and load circuits. As a result the PD1201
is well suited for industrial environments where electro-
magnetic interference would disrupt the operation of
electromechanical relays.
Approvals
• UL recognized file #: E69938
• CSA certified file #: LR 43639-8
Ordering Information
Part #
PD1201
Description
16 Pin DIP (25/Tube)
Pin Configuration
PD1201 Pinout
1
Ð LED
16
+ LED
8
AC Load
ZC
10
AC Load
DS-PD1201-R9
www.clare.com
1