|
CPC2400E Datasheet, PDF (1/18 Pages) Clare, Inc. – Embedded Modem Module | |||
|
Features
⢠Easy Integration
⢠Small Footprint 1.00â x 2.50â
⢠Full Duplex 2400bps
⢠Low Power Consumption
⢠V.24 DTE Interface
⢠Single +5V Supply Operation
⢠Supported Protocols: V.22bis, V.23, V.22
⢠UL Recognized Component
⢠FCC Part 15B Compliant
⢠FCC Part 68 Approved (User Transferrable)
Applications
⢠Vending/Gaming Machines
⢠Set Top Box Back Channel
⢠Direct Broadcast Satellite
⢠Utility Meters
⢠Point of Sale Terminals
⢠Remote Diagnostics
⢠Remote Telemetry
⢠Remote Monitoring
⢠Embedded Applications
CPC2400E
Embedded Modem Module
Description
The CPC2400E is a 2400 baud embedded modem mod-
ule intended for applications that require a data commu-
nications link to the Public Switched Telephone Network
(PSTN). The CPC2400E is a complete module on a small
1.0â x 2.5â printed circuit board that can be socketed or
soldered into the host system mother board. The module
is FCC Part 68 approved and includes a user trans-
ferrable registration number. It also is a UL recognized
component. The CPC2400E can be used in a variety of
applications including set top box back channel commu-
nications, vending machines, remote utility metering,
remote data acquisition, plus a host of other applications.
The CPC2400E supports a standard serial V.24 TTL
interface to the DTE equipment.
Approvals
⢠UL/C-UL: 174201
⢠FCC Reg. # LVRPHL-25931-MD-E
Ordering Information
Part #
CPC2400E
Description
2400 Baud Embedded Modem Module
Block Diagram
+5V
DTE
PARALLEL
CONTROLLER
V.24
SERIAL
V.22BIS
DATA PUMP
LINE
INTERFACE
DAA
Pin Configuration
TIP
RING
AUDIO
OUT
VCC
J1
GND
-DTR
-DCD
-MUTE
A1
N/C
RXD
TXD
GND
J2 N/C
TIP
N/C
RING
N/C
DS-CPC2400-R2
www.clare.com
1
|
▷ |