CPC1786 Datasheet, PDF (1/6 Pages) Clare, Inc. – i4-PAC™ DC Power Relay

CPC1786
i4-PAC™ DC Power Relay
Parameter
Blocking Voltage
Load Current, T_A=25ºC
With 5ºC/W Heat Sink
No Heat Sink
On-Resistance
R_θJC
Rating
1000
1.75
0.65
2
0.35
Units
V_P
A_DC
Ω
ºC/W
Features
• 100% Solid State
• Compact i4-PAC™ Power Package
• Low Thermal Resistance (0.35°C/W)
• 1.75A_DC Load Current with 5ºC/W Heat Sink
• Electrically Non-conductive Thermal Pad for Heat
Sink Applications
• No Moving Parts
• Low Drive Power Requirements
• Arc-Free With No Snubbing Circuits
• 2500V_rms Input/Output Isolation
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
Applications
• Industrial Controls
• Motor Control
• Robotics
• Medical Equipment—Patient/Equipment Isolation
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Transportation Equipment
• Aerospace/Defense
Pin Configuration
Description
Clare and IXYS have combined to bring OptoMOS^®
technology, reliability and compact size to a new
family of High Power Solid State Relays. As part of
this new family, the CPC1786 single pole normally
open (1-Form-A) DC Solid State Relay employs
optically coupled MOSFET technology to provide
2500V_rms of input to output isolation.
The output is constructed with an efficient MOSFET
switch and photovoltaic die that uses Clare’s patented
OptoMOS architecture while the input GaAlAs
infrared LED provides the optically coupled control.
The combination of low on-resistance and high load
current handling capability makes this relay suitable
for a variety of high-performance DC switching
applications.
The unique i4-PAC package pioneered by IXYS
allows solid state relays to achieve the highest load
current and power ratings. This package features
an IXYS unique process where the silicon chips are
soft soldered onto the Direct Copper Bond (DCB)
substrate instead of the usual copper leadframe. The
DCB ceramic, the same substrate used in high power
modules, not only provides 2500V_rms isolation but also
very low thermal resistance (0.35°C/W).
Approvals
• UL recognized component: File # E69938
• Certified to UL 508
Ordering Information
Part #
CPC1786J
Description
i4-PAC™ (25 per tube)
Switching Characteristics of
Normally Open (Form A) Devices
1
2
+
-
34
-
+
RoHS
2002/95/EC
e3
CONTROL
I_LOAD
+90%
10%+
T_ON ^TOFF
DS-CPC1786-R02
www.clare.com
1