CPC1727_10 Datasheet, PDF (1/7 Pages) Clare, Inc. – ISOPLUS™-264 DC Power Relay

CPC1727
Single-Pole, Normally Open
ISOPLUS™-264 DC Power Relay
Characteristics
Parameter
Blocking Voltage
Load Current, T_A=25°C:
With 5°C/W Heat Sink
No Heat Sink
On-Resistance
R_θJC
Rating
250
8.6
3.4
0.09
0.3
Units
V_P
A_DC
Ω
°C/W
Features
• 8.6A_DC Load Current with 5°C/W Heat Sink
• Low 0.09Ω On-Resistance
• 250V_P Blocking Voltage
• 2500V_rms Input/Output Isolation
• Low Thermal Resistance (0.3 °C/W)
• Electrically Non-Conductive Thermal Pad for Heat
Sink Applications
• Low Drive Power Requirements
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
Applications
• Industrial Controls / Motor Control
• Robotics
• Medical Equipment—Patient/Equipment Isolation
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Transportation Equipment
• Aerospace/Defense
Approvals
• UL 508 Certified Component: File E69938
• CSA Certified Component: Certificate 1172007
Pin Configuration
1
2
+
-
34
-
+
RoHS
2002/95/EC
e3
Description
Clare and IXYS have combined to bring OptoMOS^®
technology, reliability and compact size to a new family
of high-power Solid State Relays.
As part of this family, the CPC1727 single-pole
normally open (1-Form-A) DC Solid State Power
Relay employs optically coupled MOSFET technology
to provide 2500V_rms of input to output isolation.
The output, constructed with an efficient MOSFET
switch and photovoltaic die, uses Clare’s patented
OptoMOS architecture while the input, a highly
efficient GaAlAs infrared LED, provides the optically
coupled control. The combination of low on-resistance
and high load current handling capability makes this
relay suitable for a variety of high performance DC
switching applications.
The unique ISOPLUS-264 package pioneered by
IXYS enables Solid State Relays to achieve the
highest load current and power ratings. This package
features a unique IXYS process where the silicon
chips are soft soldered onto the Direct Copper Bond
(DCB) substrate instead of the traditional copper
leadframe. The DCB ceramic, the same substrate
used in high power modules, not only provides
2500V_rms isolation, but also very low thermal
resistance (0.3 °C/W).
Ordering Information
Part
CPC1727J
Description
ISOPLUS-264 Package (25 per tube)
Switching Characteristics
Form-A
I_F
I_LOAD
90%
t_on
10%
t_off
DS-CPC1727 - R03
www.clare.com
1