CPC1727 Datasheet, PDF (1/6 Pages) Clare, Inc. – ISOPLUS™-264 DC Power Relay

CPC1727
ISOPLUS™-264 DC Power Relay
Parameter
Blocking Voltage
Load Current, T_A=25ºC
With 5°C/W Heat Sink
No Heat Sink
On-resistance
R_θJC
Rating
250
8.6
3.4
0.09
0.3
Units
V_P
A_DC
Ω
ºC/W
Features
• 100% Solid State
• Compact ISOPLUS-264 Power Package
• Low Thermal Resistance (0.3°C/W)
• 8.6A_DC Load Current with 5°C/W Heat Sink
• Electrically Non-conductive Thermal Pad for Heat
Sink Applications
• Low Drive Power Requirements
• Arc-Free With No Snubbing Circuits
• 2500V_rms Input/Output Isolation
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
Applications
• Industrial Controls
• Motor Control
• Robotics
• Medical Equipment—Patient/Equipment Isolation
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Transportation Equipment
• Aerospace/Defense
Pin Configuration
Description
Clare and IXYS have combined to bring OptoMOS^®
technology, reliability and compact size to a new
family of High Power Solid State Relays. As part of
this new family, the CPC1727 single pole normally
open (1-Form-A) DC Solid State Relay employs
optically coupled MOSFET technology to provide
2500V_rms of input to output isolation.
The output is constructed with an efficient MOSFET
switch and photovoltaic die that uses Clare’s patented
OptoMOS architecture while the input GaAlAs
infrared LED provides the optically-coupled control.
The combination of low on-resistance and high load
current handling capability makes this relay suitable
for a variety of high performance DC switching
applications.
The unique ISOPLUS-264 package pioneered by
IXYS allows solid state relays to achieve the highest
load current and power ratings. This package features
an IXYS unique process where the silicon chips are
soft soldered onto the Direct Copper Bond (DCB)
substrate instead of the usual copper leadframe. The
DCB ceramic, the same substrate used in high power
modules, not only provides 2500V_rms isolation but also
very low thermal resistance (0.3°C/W).
Approvals
• UL 508 Recognized Component: File # E69938
Ordering Information
Part Number Description
CPC1727J
ISOPLUS-264 (25 per tube)
Switching Characteristics of Normally
Open (Form A) Devices
RoHS
2002/95/EC
1
2
+
-
e3
34
-
+
CONTROL
I_LOAD
+90%
10%+
T_ON ^TOFF
DS-CPC1727-R02
www.clare.com
1