CPC1510 Datasheet, PDF (1/5 Pages) Clare, Inc. – 1-Form-A Solid State Relay with Integrated Current Limit

CPC1510
1-Form-A Solid State Relay with
Integrated Current Limit
Parameter
Blocking Voltage
Load Current
Max R_ON
Rating
250
200
15
Units
V_P
mA
Ω
Features
• Integrated Active Current-Limit Protection
• Thermal Shutdown
• Linear AC or DC Operation
• Low Power Consumption
• Clean, Bounce-free Switching
• High Surge Capability
• Low Power Drive Requirements
• Surface Mount version available
• Tape & Reel packaging available
Applications
• General Telecom Switching
• Hook Switch
• Ringing Relay
• Dial Pulsing
• Ground Start
• Ground Fault Protection
• Instrumentation
• Automatic Tuning/Balancing
• Flying Capacitor
• Analog Multiplex
• Peripherals
• Automatic Tuning/Balancing
• Transducer Driver
• Security
• Medical Equipment
Pin Configuration
CPC1510 Pinout
AC/DC Configuration
CPC1510 Pinout
DC Only Configuration
1
+ Control
2
– Control
3
Do Not Use
6
Load
1
+ Control
5
2
Do Not Use – Control
4
Load
3
Do Not Use
6
+ Load
5
– Load
4
Description
The CPC1510 is a 1-Form-A normally open Solid
State Relay with an integrated current limit feature
that can replace electromechanical relays while
enhancing the robustness of wireline-interface
applications.
The relay is constructed using a GaAIAs LED for
actuation control and an integrated monolithic
die for the switch output. The die, fabricated in a
high-voltage dielectrically isolated technology, is
comprised of a photodiode array, switch control
with active current limiting circuitry, and MOSFET
switches. The active current limit circuitry in the
CPC1510 also provides a thermal shutdown feature
offering excellent power cross immunity for improved
survivability in harsh environments.
These enhancements greatly improves the
robustness of end systems using this device
compared to systems using relays without the
integrated current limit. In addition, the active
current limit circuitry enables the CPC1510 to pass
FCC 68.302 and other regulatory voltage surge
requirements when adequate overvoltage protection
is provided. The CPC1510 relay may be used
in both unidirectional DC applications as well as
bi-directional AC applications.
Approvals
• UL - File # E76270
Ordering Information
Part #
CPC1510G
CPC1510GS
CPC1510GSTR
Description
6 Pin 0.250" Wide, Through Hole (50/Tube)
6 Pin 0.250" Wide, Surface Mount (50/Tube)
6 Pin 0.250" Wide, Surface Mount (1000/Reel)
Switching Characteristics of
Normally Open (Form A) Devices
CONTROL
10ms
LOAD
+90%
10%+
10%+
T_ON ^TOFF
DS-CPC1510-R01
www.clare.com
1