CLE501 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – 390nm UV LED Dome Lens, TO-46 Aluminum Package

CLE501
390nm UV LED
Dome Lens, TO-46 Aluminum Package
0.165 (4.19)
0.145 (3.68)
0.156 (3.96) 1.00 (25.4) min.
0.136 (3.45)
0.190 (4.83)
0.176 (4.47)
® _{Clairex}
Technologies, Inc.
April, 2006
0.100 (2.54) dia.
0.215 (5.46)
0.205 (5.21)
CATHODE
(connected
to case)
ANODE
0.025 (0.64) max.
0.050 (1.27) nom
0.019 (0.48)
0.016 (0.41)
Case 7
ALL DIMENSIONS ARE IN INCHES (MILLIMETERS)
Anode lead is longer than cathode lead.
0.147 (3.73)
0.137 (3.48)
features
• 390nm wavelength
• ±35° emission angle
• Cathode connected to case
• RoHS compliant
applications
• identifying petroleum deposits in
down-hole drilling operations
• currency validation
• security
• water purification
• UV epoxy curing
description
The CLE501 contains a single
390nm LED die mounted on a
TO-46 aluminum header. Custom
variations are available which can
contain from one to more than nine
die. Special lenses and multiple
lead packages are also available.
Call Clairex for more information.
absolute maximum ratings (T_A = 25°C unless otherwise stated)
storage temperature ...................................................................... -40°C to +100°C
operating temperature ................................................................... -40°C to +100°C
lead soldering temperature⁽¹⁾ ......................................................................... 260°C
continuous forward current⁽²⁾ .......................................................................... 20mA
peak forward current (1.0ms pulse width, 10% duty cycle)............................... 0.5A
reverse voltage ................................................................................................. 5.0V
continuous power dissipation⁽³⁾.................................................................... 200mW
notes:
1. 0.06” (1.5mm) from case for 5 seconds maximum
2. Derate linearly 0.21mA/°C from 25°C free air temperature to T_A = +100°C.
3. Derate linearly 3.73mW/°C from 25°C free air temperature to T_A = +100°C.
Exercise caution when applying power to this unit.
It emits high amounts of UV radiation. Do not look
directly into the lens without proper eye protection.
electrical characteristics (T_A = 25°C unless otherwise noted)
symbol parameter
min typ max units test conditions
P_O
Total power output ⁽⁴⁾
1.5
-
-
V_F
Forward voltage
-
3.0
3.9
I_R
Reverse current
λp
Peak emission wavelength
-
-
10
375 390 405
θ_HP
Emission angle at half power points
-
70
-
note: 4. Power output is measured in an integrating sphere.
mW
V
µA
nm
deg.
I_F = 20mA
I_F = 20mA
V_R = 5.0V
I_F = 20mA
I_F = 20mA
Clairex reserves the right to make changes at any time to improve design and to provide the best possible product.
Clairex Technologies, Inc.
Phone: [phone]
1301 East Plano Parkway
Fax: [phone]
Plano, Texas 75074-8524
www.clairex.com