CLE436 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – High Power Red LED - Minimal Infrared Content D ome Lens Can, Hermetically Sealed

CLE436
Preliminary
High Power Red LED – Minimal Infrared Content
Dome Lens Can, Hermetically Sealed
® _{Clairex}
Technologies, Inc.
March, 2006
0.165 (4.19)
0.145 (3.68)
0.190 (4.83)
0.176 (4.47)
0.156 (3.96) 1.00 (25.4) min.
0.136 (3.45)
0.100 (2.54) dia.
0.215 (5.46)
0.205 (5.21)
ANODE
CATHODE
features
• Dome lens TO-46 Package
• Minimal infrared content
• ± 11° emission angle
• High luminous flux
• RoHS compliant
description
The CLE436 is an advanced, high-
efficiency, high speed, GaAlAs red
light emitting diode designed for
minimal light in the infrared region.
Radiated emissions above 750nm
are less than 0.1% of emissions at
660nm. For additional information,
call Clairex.
0.025 (0.64) max.
0.050 (1.27) nom
0.019 (0.48)
0.016 (0.41)
0.147 (3.73)
0.137 (3.48)
ALL DIMENSIONS ARE IN INCHES (MILLIMETERS)
Case 4
absolute maximum ratings (T_A = 25°C unless otherwise stated)
storage temperature ...................................................................... -65°C to +150°C
operating temperature ................................................................... -65°C to +125°C
lead soldering temperature⁽¹⁾ ......................................................................... 260°C
continuous forward current⁽²⁾ .......................................................................... 60mA
reverse voltage .................................................................................................... 5V
peak forward current (1.0ms pulse width, 10% duty cycle).................................. 1A
continuous power dissipation⁽³⁾.................................................................... 200mW
notes:
1. 0.06” (1.5mm) from case for 5 seconds maximum.
2. Derate linearly 0.48mA/°C from 25°C free air temperature to T_A = +125°C.
3. Derate linearly 1.60mW/°C from 25°C free air temperature to T_A = +125°C.
electrical characteristics (T_A = 25°C unless otherwise noted)
symbol parameter
min typ max units test conditions
I_V
Luminous intensity
Φ_V
Luminous flux
V_F
Forward voltage
I_R
Reverse current
θ_HP
Emission angle at half power points
λ_p
Peak Wavelength
-
650
-
-
72
-
-
-
2.2
-
-
10
-
22
-
650 660 670
mcd
mlm
V
µA
deg.
nm
I_F = 20mA
I_F = 20mA
I_F = 20mA
V_R = 5.0V
I_F = 20mA
I_F = 20mA
Clairex reserves the right to make changes at any time to improve design and to provide the best possible product.
Revised 3/20/06
Clairex Technologies, Inc.
Phone: [phone]
1301 East Plano Parkway
Fax: [phone]
Plano, Texas 75074-8524
www.clairex.com