CLE331E Datasheet, PDF (1/1 Pages) Clairex Technologies, Inc – Aluminum Gallium Arsenide IRED Point source Die

CLE331E
Aluminum Gallium Arsenide IRED
Point source Die
® _{Clairex}
Technologies, Inc.
December, 1998
(00..1103,7801(±±3.003,.010)50m6a) ^x
251,.040M(2IN5.4(1) .m0i)n.
00,.70±500,(1.2(07.)0m28ax±0.004)
Ø5,04.121(30.(251.431))
Ø5,02.620(70.(250.276))
Ø20,.15040(0(2..1504)) pin circle
Ø4,02.916(90.(146.299))
Ø4,01.416(30.(146.134))
ANODE
CATHODE
00,.20150N(0O.2M5)(0no.0m10)
Ø00,4.0819(0(.01.4889))
Ø00,4.0116(0(.01.4611))
3,07.314(70.(134.773))
3,04.813(70.(133.478))
ALL DIMENSIONS ARE IN MILLI_CM_aE_sT_eE₆RS (INCHES)
features
• high power output
• 850nm wavelength
• > 10MHz operation
• TO-46 epoxy-dome lens
• wide beam angle
• uniform output radiation pattern
• 0.002" dia. point source junction
absolute maximum ratings (T_A = 25°C unless otherwise stated)
storage temperature ...................................................................... -40°C to +125°C
operating temperature ................................................................... -40°C to +100°C
lead soldering temperature⁽¹⁾ ......................................................................... 260°C
continuous forward current⁽²⁾ ........................................................................ 100mA
peak forward current (1.0ms pulse width, 10% duty cycle).................................. 1A
reverse voltage .................................................................................................... 5V
continuous power dissipation⁽³⁾.................................................................... 200mW
description
The CLE331E is an advanced, high
efficiency, high speed, point source,
AlGaAs infrared-emitting diode
intended for applications requiring a
uniform output radiation pattern. The
point source die junction is typically
0.002" dia. and provides a uniform
radiation pattern without the usual
bond wire shadow effect.
notes:
1. 0.06” (1.5mm) from the header for 5 seconds maximum.
2. Derate linearly 1.07mA/°C from 25°C free air temperature to T_A = +100°C.
3. Derate linearly 2.13mW/°C from 25°C free air temperature to T_A = +100°C.
electrical characteristics (T_A = 25°C unless otherwise noted)
symbol parameter
min typ max units test conditions
P_O
Total power output⁽⁴⁾
-
1.5
-
mW I_F = 100mA
V_F
Forward voltage
-
-
2.2
V
I_F = 100mA
I_R
Reverse current
-
-
10
µA V_R = 3V
λ_P
Peak emission wavelength
- 850 -
nm I_F = 100mA
BW Spectral bandwidth at half power points
-
60
-
nm I_F = 100mA
Θ_HP
Emission angle at half power points
- 100 -
deg. I_F = 100mA
t_r, t_f
Radiation rise and fall time
-
5.0
-
ns I_F = 100mA, f = 1kHz, D.C.= 50%
note: 4. Other ranges of power output and test conditions can be specified. Call Clairex for applications assistance.
Clairex reserves the right to make changes at any time to improve design and to provide the best possible product.
Revised 3/15/06
Clairex Technologies, Inc.
Phone: [phone]
1301 East Plano Parkway
Fax: [phone]
Plano, Texas 75074-8524
www.clairex.com