465805000 Datasheet, PDF (6/7 Pages) C&K Components – TP Series Tiny Pushbutton Switches

TP Series
Tiny Pushbutton Switches
A
Cap, .100" DIA. Plungers
AVAILABLE HARDWARE
Cap, .100" DIA. Plungers
(Recommended for S9 plunger)
Cap, .100" DIA. Plungers
PART NO.
508101000 WHITE
508102000 BLACK
Material: Nylon
Finish: Gloss
PART NO.
538701000 WHITE
538702000 BLACK
Material: Nylon
Finish: Gloss
PART NO.
465801000 WHITE
465802000 BLACK
Material: Nylon
Finish: Gloss
Cap, .120" DIA. Plungers
PART NO.
708901000 WHITE
708902000 BLACK
Material: Nylon
Finish: Gloss
Cap, .120" DIA. Plungers
( .301 )
1.000° MAX.
.090
DRAFT
CAVITY ID
.310
6X 45 ° X .010 CHAMFER
OR .010 R. LEAD IN
PART NO.
891D01000 WHITE
891D02000 BLACK
Material: Nylon
Finish: Gloss
R.015
R.012
.065 ±.005
.250
.120
P
TUNNEL GATE AS CLOSE
AS POSSIBLE TO THIS SURFACE.
Cap, J81 option only
PART NO.
484601000 WHITE
484602000 BLACK
Material: Nylon
Finish: Gloss
NOTE: Additional nuts, locking rings and lockwashers available separately, see section “Technical Data and Additional Hardware”.
Other cap colors available, consult Customer Service Center.
PART NO.
798201000 WHITE
798202263 BLACK
Material: Nylon
Finish: Matte
Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the PC
mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and
frame. Available in two basic styles and four panel thicknesses .047-.125 in. Material: Nylon. Finish: Matte.
TYPICAL APPLICATION
Panel Inserts
.047" (1,19) PANEL THK. .062" (1,57) PANEL THK. .090" (2,29) PANEL THK. .125" (3,18) PANEL THK.
PART NO.
432502263
PART NO.
432602263
PART NO.
432702263
PART NO.
432802263 BLACK
For part numbers
432502263, 432602263
PANEL MOUNTING
For part numbers
432702263, 432802263
.005 R.
.495 ± .505
(0,13)
(12,57 ± 12,83)
MAX. TYP.
.005 R.
.495 ± .505
(0,13)
(12,57 ± 12,83)
MAX. TYP.
.595 ± .605
(15,11 ± 15,37)
.620 ± .625
(15,75 ± 15,88)
Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for
indicator light assembly. Order insert separately from frame. Blank insert panel (without hole
for LED) also available. LED not included.
PANEL INSERT
WITH HOLE FOR LED
PART NO.
894902000
BLANK PANEL INSERT
WITHOUT HOLE FOR LED
PART NO.
476602000 BLACK
A-20
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com