MA00L1NZQD Datasheet, PDF (4/5 Pages) ITT Industries – Half-inch Rotary Switches

M Series
Half-inch Rotary Switches
SHORTING/NON-SHORTING CONTACTS
N NON-SHORTING CONTACTS
Break-before-make
TERMINATIONS
Z SOLDER LUG
C PC THRU-HOLE
SP
DP
SP
DP
PANEL MOUNTING
WITH FLATS
WITHOUT FLATS
0.213
(5.41)
0.260 DIA
(6.59)
PC MOUNTING
36º INDEXING
SP
DP
0.260 DIA
K
(6.60)
Hardware: All models, one mounting nut and lockwasher
supplied standard. MA00 thru MD00 models: two stop pins
and adhesive mylar washer supplied. ME00 thru MH00
models: two stop rings supplied. Hardware is available
separately, see section “Technical Data and Additional
Hardware”.
PC MOUNTING
30º INDEXING
SP
DP
NOTE: Q contact material standard. Terminal numbers marked on side of housing.
All terminals insert molded. All terminals present regardless of number of switch positions.
CONTACT MATERIAL
Actuators and schematics shown in pos. 1.
OPTION
CODE
CONTACT
MATERIAL
TERMINAL
PLATING
RATING
Q
SILVER ^{1, 2}
SILVER ²
POWER
CARRY: 6 AMPS CONTINUOUS. SWITCH: 250 mA @ 125 V AC
or 28 V DC.
G
GOLD OVER
SILVER ^{3, 4}
GOLD ⁴
LOW LEVEL/DRY CIRCUIT
OR POWER
0.4 VA MAX. @ 20 V AC or DC MAX. or, CARRY: 6 AMPS
CONTINUOUS. SWITCH: 250 mA @ 125 V AC or 28 V DC.
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications.
1 _{MOVABLE CONTACTS: Non-shorting: Copper alloy, silver plated.}
Shorting: Zinc alloy, silver plated.
2 _{STATIONARY CONTACTS & ALL TERMINALS: Copper alloy, silver plated.}
3 _{MOVABLE CONTACTS: Non-shorting: Copper alloy, with gold plate over nickel plate, over silver plate.}
Shorting: Zinc alloy, with gold plate
4 _{STATIONARY CONTACTS & ALL TERMINALS: Copper alloy, with gold plate}
over nickel plate over silver plate.
K–16
NOTE: Any models supplied with Q, G contact material are RoHS compliant.
All models
when ordered with S1-S6 stainless steel actuator options.
Third Angle
Projection
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com