302719P02 Datasheet, PDF (4/8 Pages) C&K Components – 3 Series Thumbwheel Switches

3 Series
Thumbwheel Switches
MOUNTING STYLE
Type 1 Rear Mount
MOUNTING
STYLE
DIM. ‘A’
DIM. ‘B’
10
(.350 x N) + .340
(.350 x N) + .560
(8,89 x N) + (8,64) (8,89 x N) + (14,22)
10
N = Number of sections.
Recommended panel thickness:
0.46-.125
(1,16-3,18)
SWITCH ASSEMBLY W/ ENDPLATES–.350 (8,89) SECTION PITCH
PANEL MOUNTING
Mtg. Holes
19
SWITCH SECTION ONLY–UNASSEMBLED WITHOUT ENDPLATES OR SPACERS
(Must be ordered with number of sections option “0”, see Page M–4.)
Type 2 Rear Mount
20 SWITCH ASSEMBLY W/ ENDPLATES–.350 (8,89) SECTION PITCH
N = Number of sections.
29
SWITCH SECTION ONLY–UNASSEMBLED WITHOUT ENDPLATES OR SPACERS
(Must be ordered with number of sections option “0”, see Page M–4.)
M
NOTE: Endplates, blank sections, spacers and
assembly hardware available separately, see pages M–8 and M–9.
N = Number of sections.
M–6
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com