NSE10 Datasheet, PDF (3/8 Pages) ITT Industries – Navigation Switch Encoders

Features/Benefits
• Select switch
• Metallic shaft
• Self clinching terminals
• Positive detent feeling
• Large variety of shaft
NSE11 Series
Navigation Switch Encoders
Typical Applications
• Audio / Video equipment
• Navigation systems
• Computer peripherals
• Car radio
Construction
FUNCTION: Incremental signal + select switch.
CONTACT ARRANGEMENT: Phase difference output of two signal
A and B.
TERMINAL: PC pin.
Mechanical
Electrical
MAXIMUM VOLTAGE: 5 VDC.
MAXIMUM CURRENT DC: 10 mA
MINIMUM CURRENT DC: 1 mA
DIELECTRIC STRENGTH: 300 VAC / 1 mA.
INSULATION RESISTANCE: 100 MΩ min.
BOUNCE TIME: ≤ 2 ms
NUMBER OF DETENT: 20 or 30
DETENT TORQUE: 3 - 20 mN.m
Switch Function
ROTATIONAL ANGLE: 360˚ endless.
CONTACT: SPST
ROTATIONAL LIFE: 15,000 cycles (1 cycle: 360˚ CW + 360˚ CCW).
MAXIMUM POWER: 5 VDC 10 mA (min. 1 mA)
Number Number Bracket Select
CONTACT RESISTANCE: Initial 100mΩ
TRAVEL: 0,5 mm +/- 0,4 mm
C
of Pulse of Detent Spacing Function
Designation
OPERATING FORCE: 4,5 +/- 1,5 N
15
30
11 mm
No
NSE11DV57NCF215A
LIFE TIME: 20,000 operations
20
20
11 mm
No
NSE11DV57NCF220A
15
30
11 mm
Yes NSE11DSV57NAF215A
Environmental
20
20
11 mm
Yes NSE11DSV57NAF220A
OPERATING TEMPERATURE: -30˚C to +70˚C.
15
30 13,8 mm Yes NSE11DSV57NAF215F
STORAGE TEMPERATURE: -40˚C to +85˚C.
20
20 13,8 mm Yes NSE11DSV57NAF220F
Process
NOTE: Specifications listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
SOLDERING PROCESS:
Manual soldering 300˚C max., 3s max.
Wave soldering 260˚C max., 3s max.
No cleaning.
How To Order
Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired
option from each category and place it in the appropriate box.
NSE1 1
D
S
V
5
7
N
Detent
D With detent
Switching Function
(NONE) No Switch
S Switch
Appearance Type
V Vertical axis
Terminal Length
5 4,2 mm
Bushing Dimension
7 Length = 7 mm
Fixed Pillar
N without locating pin
Shaft Length & Push Switch Slot
A With select; Length of Shaft = 12,5 mm; push switch slot 0,5 mm
C Without select; Length of Shaft = 13 mm; no push switch slot
3
F
2
Pulse
15 15 pulse
20 20 pulse
Bracket Spacing
A 11 mm
F 13,8 mm
Flat Length
2 10 mm
Shaft Type
F with a flat
Dimensions are shown: mm (inch)
Dimensions subject to change
www.ittcannon.com