3P0210000 Datasheet, PDF (3/5 Pages) List of Unclassifed Manufacturers – Miniature Pushwheel Switches

3P Series
Miniature Pushwheel Switches
MOUNTING STYLE
0 SNAP-IN FRONT MOUNT,
SECTION PITCH: .300 (7,62) EACH SECTION
3 SNAP-IN FRONT MOUNT WITH SPACER,
SECTION PITCH: .400 (70,16) EACH SECTION, LAST SECTION .300 (7,62)
N = Number of sections.
Recommended panel thickness:
.039-.156
(0,99-3,95)
0 SHORT PCB
TERMINATIONS
1 EXTENDED PCB WITH PROVISION
FOR COMPONENTS
N = Number of sections.
Recommended panel thickness:
.039-.156
(0,99-3,95)
N SHORT PCB, TYPE 0 WITH SOLDER PINS
P EXTENDED PCB, TYPE 1 WITH
SOLDER PINS
Signal traces cut, except for common(s).
9 ANY COMBINATION OF TERMINATION
CONFIGURATIONS OR SPECIAL TERMINATIONS
Specify on configuration form, page M-15
and consult Customer Service Center.
For terminal location numbers, see next page.
M
For terminal location numbers, see next page.
Signal traces cut, except for common(s).
** Note: Termination option N (RoHS compliant) replaced termination option 3 (Non-RoHS compliant).
Termination option P (RoHS compliant) replaced termination option A (Non-RoHS compliant).
PC Board 1/32" (0,79) thick.
NOTE: All terminal holes shown may not be present for all function codes,
consult Customer Service Center.
M–13
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com