E-BOX Datasheet, PDF (2/8 Pages) –

E-BOX
Housing for RAFIX 22 FS Control Components
The RAFIX 22 FS E-Box is an elegant, extremely well-
designed housing for control components. It can be used
wherever individual control component units are required
in remote places. Very typical, for example, for Emergen-
cy-Stop applications along a production line or on the
safety fence.
The dimensions of the RAFIX 22 FS E-BOX and also the
assembly concept are based on the edge dimension of a
40 mm profile rail.
Simple assembly concept, based on 40 mm profile rails
N Insert metal clip in profile
rail slot (locating noses on
the clip ensure precise
adjustment, fix with only
one screw)
N Mount housing bottom part
N Attach contact module
N Insert the wires
N The metal clip can also be
N Connect the terminals
screwed onto other surfaces.
N Insert RAFIX 22 FS actuator
(e.g. Emergency-Stop) into
housing top part
N Fix actuator with a ring nut
N Snap housing top part onto
bottom part. Done!
Drilling pattern for direct mounting with screws
N As an alternative to mounting
with the metal clip, the bottom
of the housing can be attached
directly with M4 screws.
Cable inlet
on side
Cable inlet
on bottom
2