TF2 Datasheet, PDF (1/6 Pages) C&K Components – Miniature Snap-acting Switches

TF2 Series
Miniature Snap-acting Switches
Features/Benefits
• Broad range of operating forces
• Ratings up to 10 AMPS
• Wide variety of actuator styles
• Quick connect terminations
Typical Applications
• Motor controls
• Thermostatics
• Portable tools
• Air Conditioner
Specifications
CONTACT RATING: From low level* to 10 AMPS @125/250 V AC.
ELECTRICAL LIFE: 10,000 cycles
MECHANICAL LIFE: 1,000,000 cycles at 0.1A and 6A
400,000 cycles at 10A
INSULATION RESISTANCE: 1,000 M ohm min.
DIELECTRIC STRENGTH: 1,500 Vrms min. @ sea level.
OPERATING TEMPERATURE: –40ºC to 125ºC (–40ºC to 85ºC).
OPERATING FORCE: From 18 to 330 grams at actuator
button available.
MOUNTING: Torque screws 2-5 in/lbs.
* Low Level=conditions where no arcing occurs during switching, i.e., 0.4 VA max. @
J ^{20 V AC or DC max. Standard electrical life per UL 1054, rated for 6,000 operations.}
Materials
SWITCH HOUSING: Nylon 6/6
ACTUATOR BUTTON: Nylon 6/6
SPRING: Stainless Steel
PIVOT: Brass Alloy
MOVABLE CONTACTS: See electric rating page J-21
MOVABLE BLADE: BeCu
STATIONARY CONTACTS: See electric rating page J-21
TERMINALS: Brass Alloy
NOTE: Specifications and materials listed above are switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages J-21 through J-25. For additional options not shown in catalog, consult Customer Service Center.
TF2
Series
TF2
SP, Mom.
Operating Force
CC 18 grams
CF 45 grams
CG 75 grams
Electrical Rating Chart
CH 110 grams
CJ 170 grams
EC 230 grams
EE 330 grams
OPTION
CODE
F5
61058-1
0.1A 125/250 V AC (T85)
Min. 10,000 operations
H8
6A 125/250 V AC (T85)
Min. 10,000 operations
K6
10A 125/250 V AC (T85)
Min. 10,000 operations
0.1A 125/250 V AC
µT125, 1E4
6A 125/250 V AC
µT125, 1E4
10(4)A 125/250 V AC
µT125, 1E4
* Note: No UL & ENEC 15 safety for Termination option “60”
Mounting Style
S Standard
V Metric
Actuator
P00 Pin plunger
A10 Lever roller 12.5 mm
A15 Lever roller 25.9 mm
A20 Lever roller 12.5 mm
A25 Lever roller 25.9 mm
T10 Lever 14 mm
T14 Simulated roller 24.5 mm
T15 Lever 27.5 mm
T16 Lever 31.7 mm
T17 Lever 35 mm
T20 Lever 14 mm
T24 Simulated lever 24.5 mm
T25 Lever 27.5 mm
T26 Lever 31.7 mm
T27 Lever 35 mm
see chart on following pages for
detailed information
Circuitry
C SPDT
W SPST N.C.
Y SPST N.O.
Terminations
40 .187" quick connect
4A .250" quick connect
5A .250" off set quick connect
5B .187" off set quick connect
60 Screw style *
10 Solder
J–20
Dimensions are shown: mm
Specifications and dimensions subject to change
www.ck-components.com