RTBV Datasheet, PDF (1/6 Pages) ITT Industries – 1-2 Pole Coded Rotary Switches

RTBV Series
1-2 Pole Coded Rotary Switches
Features/Benefits
• Totally sealed
• Detent angles, 15 , 22.5 , 30 and 36
• Multi pole
• Coding functions
• Robust construction
Typical Applications
• Telecommunications
• Military
• Instrumentation
• Heavy-duty industrial equipment
Electrical Data
SWITCHING MODE:
MAX. SWITCHING POWER:
MAX. SWITCHING CURRENT:
MIN. SWITCHING CURRENT:
MAX. CARRYING CURRENT:
MAX. VOLTAGE:
MIN. VOLTAGE:
BOUNCE:
CONTACT RESISTANCE after life:
DIALECTRIC STRENGTH between
contacts or contacts and frame:
INSULATION RESISTANCE between
contacts or contacts and frame:
Mechanical Data
NUMBER OF BANKS:
OPERATING TORQUE:
MECHANICAL STOP RESISTANCE:
BUSHING MOUNTING TORQUE:
Silver
BBM*
5VA
250 mA
10 mA
5A
25V
5V
<5ms
<100mΩ
500 V rms
>10⁹Ω
Gold
BBM*
0.2VA
20 mA
1 mA
1A
25V
1V
<5ms
<100mΩ
500 V rms
>10⁹Ω
1 to 10
5 Ncm±30% (with 1 module)
>70 Ncm
100 Ncm
Environmental Data
OPERATING TEMPERATURE:
STORAGE TEMPERATURE:
TOTALLY SEALED:
-25⁰C to +70⁰C
-40⁰C to +85⁰C
Immersion test acc. to MIL
R22.097 F and NFC 20631/QF
* BBM= Break Before Make (non-starting)
Materials
HOUSING: PBT thermoplastic and PC thermoplastic
STATIONARY CONTACTS & TERMINALS: Nickel plated Brass with
additional Gold or Silver plating, insert molded in PBT thermoplastic.
ROTOR: Printed circuit, gold or silver plated.
ACTUATOR: Steel
BUSHING: Brass
HARDWARE: Stop pin and spring: Stainless steel
All models are RoHS compliant and compatible.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
K ^{described on pages K-25 thru K-29. For additional options not shown in catalog, consult Customer Service Center.}
Designation
Contact Material
RTBV
S Silver plated, matte-tin terminal
P Gold plated, matte-tin terminal
Indexing
1 15°/24 positions max.
2 22.5°/16 positions max.
3 30°/12 positions max.
4 36°/10 positions max.
Number
of Banks**
1 1 Bank
2 2 Banks
3 3 Banks
4 4 Banks
Shaft Diameter & Style***
N Metric shaft .236 (6,0)
P Standard shaft .250 (6,35)
Actuator Length
Z (.984) 25 mm
Actuator Option Angle*
N None for actuators without a flat
0 0° angle
3 30° angle
6 60° angle
Switch Function Number of Poles or code (binary
code = B, complement = C, direct +complement
= BC) (first digit), Stop (with=S, without=W),
Maximum Position (third & fourth digit)
1S02 SP, 02 positions with stop
1S03 SP, 03 positions with stop
1S04 SP, 04 positions with stop
F Metric shaft with flat .236 (6,0) 9
G Standard shaft with flat .250 (6,35) 2
S Metric shaft with slot .236 (6,0) 8
T Standard shaft with slot .250 (6,35) 7
Seal
A Standard bushing for panel mount
D Sealed bushing for panel mount
90° angle
120° angle
180° angle
270° angle
1S05 SP, 05 positions with stop
1S14 SP, 14 positions with stop
GS_ _ Gray Code with stop (indicate position)
1S06 SP, 06 positions with stop
1S16 SP, 16 positions with stop
GW_ _ Gray Code without stop (indicate position) only can be 10,12, 16, 24 based on indexing
1S07 SP, 07 positions with stop
1W16 SP, 16 positions without stop BS_ _ Binary Code with stop (indicate position)
1S10 SP, 10 positions with stop
1S24 SP, 24 positions with stop
BW_ _ Binary Code without stop (indicate position) only can be 10,12, 16, 24 based on indexing
1W10 SP, 10 positions without stop 1W24 SP, 24 positions without stop CS_ _ Complement with stop (indicate position)
1S11 SP, 11 positions with stop
2S04 DP, 4 positions with stop
CW_ _ Complement without stop (indicate position) only can be 10,12, 16, 24 based on indexing
1S12 SP, 12 positions with stop
2S05 DP, 5 positions with stop
ES_ _ Direct+Complement with stop (indicate position)
1W12 SP, 12 positions without stop 2S06 DP, 6 positions with stop
EW_ _ Direct+Complement without stop (indicate position) only can be 10,12, 16, 24 based on indexing
* Other angles available by request
** Several functions can be combined. For more information consult us.
***Note: Metric diameter shafts are only available with metric diameter bushings, standard 1.250 inch
diameter shafts are only available with standard 3/8 diameter bushings.
NOTE: S&T Shaft Diameter and Style are only available with Actuator Option angle 0, 6, 9, 2.
K–24
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com