PTS840 Datasheet, PDF (1/4 Pages) C&K Components – Microminiature SMT Side Actuated

PTS 840 Series
Microminiature SMT Side Actuated
NEW!
Features/Benefits
• 3.5 x 3.55 mm footprint
• Front PIP leads option for
strong shear resistance
• ESD pin option
• Reduced footprint
Typical Applications
• Nomad devices
• Remote controls
• Personal health diagnostics
• Consumer electronics
B Specifications
FUNCTION: momentary action
CONTACT ARRANGEMENT: 1 make contact = SPST N.O.
TERMINALS: G and front PIP types for SMT
TRAVEL: 0.2mm + 0.2mm / -0.1 mm
LIFE: 100,000 cycles
Electrical
MAXIMUM VOLTAGE:
MAXIMUM CURRENT DC:
DIELECTRIC STRENGTH:
CONTACT RESISTANCE:
INSULATION RESISTANCE:
BOUNCE TIME:
12 VDC
50 mA
250 VA C (1mn)
≤ 500 mΩ
≥ 100 MΩ
≤ 10 ms
Type
Operating
without ground pin
Force (gf)
PTS840 GM SMTR LFS
160 -40/+70
PTS840 GK SMTR LFS
220 -70/+80
PTS840 PM SMTR LFS
160 -40/+70
PTS840 PK SMTR LFS
220 -70/+80
PTS840 GMP SMTR LFS
160 -40/+70
PTS840 GKP SMTR LFS
220 -70/+80
with ground pin
PTS840 ESDGM SMTR LFS 160 -40/+70
PTS840 ESDGK SMTR LFS 220 -70/+80
PTS840 ESDPM SMTR LFS 160 -40/+70
PTS840 ESDPK SMTR LFS 220 -70/+80
PTS840 ESDGMP SMTR LFS 160 -40/+70
PTS840 ESDGKP SMTR LFS 220 -70/+80
SMT
Leads
G leads
G leads
P leads
P leads
G leads
G leads
G leads
G leads
P leads
P leads
G leads
G leads
Pegs
No
No
No
No
Yes
Yes
No
No
No
No
Yes
Yes
Environmental
OPERATING TEMPERATURE: -40˚C to 85˚C
Process
SOLDERING: This component is suited to the following methods:
Infrared Reflow Soldering in accordance with IEC61760-1
Packaging
In reels of 3,500 pieces
Dimensions of reels according to EIA 481B
External diameter 330 mm
NOTE: Specifications listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
How To Order
Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select
desired option from each category and place it in the appropriate box.
For any part number different from those listed above, please consult your local representative.
PTS8 4 0
SMT R
LFS
ESD Pin
VOID No
ESD Yes
SMT Style
G Gullwing
P Front PIP
Packaging
SMTR Tape & reel
LFS RoHS, silver plated
Actuation Force
M 160 gf
K 220 gf
Pegs*
P with pegs
Void no pegs
* Peg option not valid for P SMT leads type
Design Recommendations
- “P” leads are recommended for applications where shear resistance is of importance
- When a precise alignment between application button and the switch is requested, version with pegs are the right choice to limit the possible floating of the switch
during solderability.
5 aug 13
B–24
Dimensions are shown: mm
Specifications and dimensions subject to change
www.ck-components.com