PNP Datasheet, PDF (1/5 Pages) C&K Components – IP68 sealed to endure harsh environments

PNP Series
Sealed Pushbutton Switch
Features/Benefits
Typical Applications
• IP68 sealed to endure harsh environments • Control Grips
A
• 1,000,000 life cycle
• Off-Road Panels
• Longer solder leads for ease of wire
• Heavy Equipment
installation
• Multiple housing styles
• Up to 5A resistive load
• Wirelead options available
• Industrial Instruments
• Lifts
• Conveyor Controls
• RoHS compliant
Specifications
FUNCTION: SPST, SPDT Double Break (Form Z) Momentary
CONTACT ARRANGEMENT: N.O. and N.C.
MOUNTING TYPE: Threaded front mount
TORQUE SPEC FOR THREADED BODY: Do not exceed 10 in-lbs
(1.35 N-m)
DIELECTRIC STRENGTH: 1000 V AC for 1 min.
INSULATION RESISTANCE: 1 G Ω @ 500 VDC
INITIAL CONTACT RESISTANCE 50 mΩ max (without wire leads)
BOUNCE TIME: <5 ms
Materials
Mechanical
OPERATING LIFE: 1,000,000 cycles
TOTAL TRAVEL: 2 mm max.
OPERATING POINT 0.9 ± 0.25 mm
OVER TRAVEL: 0.25 mm min.
OPERATING FORCE: 8N ± 1.5N
VIBRATION: 10-500 Hz 10g Max
HOUSING: PBT/PC
BASE: PBT
CAP: PBT
ACTUATOR: PBT
INTERNAL SEAL: Silicone rubber
TERMINALS: Copper with silver nickel inlay, silver plating
MOVABLE CONTACT: Copper alloy, gold over silver plating
TERMINAL SEAL: Epoxy
SHOCK: 50g 11ms sawtooth wave
Operating Environment
Electrical
CONTACT RATING:
Option “Q” Silver
5A/32 VDC resistive (25,000 cycles)
3A/32 VDC resistive (25,000 cycles)
Option “G” Gold over Silver
10mA/5 VDC resistive (1,000,000 cycles)
OPERATING TEMPERATURE: -40˚C to +85˚C
ESD PROTECTION: 15KV min.
Process Environment
SEALING: IP68
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, please contact Customer Service.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box.
PNP
8
2
Designation
PNP PNP Series
Operating Force
8
8 Newtons
Actuator Style
S
Standard
E
Extended (D housing style only)
Actuator Color *
2
Black (STD)
3
Red
5
Yellow
Housing Style
T
Standard threaded mount
D
Dome bezel
Housing Color
2
Black (STD)
* Additional colors available, please contact Customer Service
20 mar 17
A-155
E
Terminal Seal
E
Epoxy
All models are epoxy sealed
Contact Material
Q
Silver (STD)
G
Gold over silver
Termination
02 PC Pin (G contact material only)
03 Solder Lug (STD)
W2 2 x 12” 22 AWG UL1569 wire (overmolded)
W3 3 x 12” 22 AWG UL1569 wire (overmolded)
W4 4 x 12” 22 AWG UL1569 wire (overmolded)
Circuit
C
SPDT - Double Break
W
SPST NC - Double Break
Y
SPST NO - Double Break
Third Angle
Projection
Dimensions are shown: mm (inches)
Specifications and dimensions subject to change
www.ckswitches.com