NP8S2T103QE Datasheet, PDF (1/7 Pages) C&K Components – Sealed Industrial Pushbutton Switch

NP Series
Sealed Industrial Pushbutton Switch
NEW!
A ^{Features/Benefits}
• IP68 sealed
Typical Applications
• Harsh environments
• 1,000,000 life cycle
• Off-Road
• Multiple housing styles
• Industrial
• Capable of up to 5A resistive load • Transportation
• Wirelead options available
• Military
• RoHS compliant
Specifications
FUNCTION: SPDT Double Break (Form Z) Momentary
CONTACT ARRANGEMENT: N.O. and N.C.
MOUNTING TYPE: Threaded front or rear mount and slot mount
Mechanical
OPERATING LIFE: 1,000,000 cycles
TOTAL TRAVEL: 1.6 ± 0.15 mm
OPERATING POINT 0.9 ± 0.25 mm
OVER TRAVEL: 0.45 min.
OPERATING FORCE: 8N ± 1N
VIBRATION: 10-500 Hz 10g Max
SHOCK: 50g 11ms sawtooth wave
Electrical
CONTACT RATING:
Option G - Gold over Silver
10mA/5 VDC (1,000,000 cycles)
Option Q - Silver
1A/28 VDC resistive (1,000,000 cycles)
5A/28 VDC resistive (25,000 cycles)
3A/28 VDC inductive (25,000 cycles)
DIELECTRIC STRENGTH: 1000 V AC for 1 min.
INSULATION RESISTANCE: 1 G Ω @ 500 VDC
INITIAL CONTACT RESISTANCE 50 mΩ max (without wire leads)
BOUNCE TIME: <5 ms
Materials
HOUSING: 6061-T6 Aluminum, black or clear anodized
BASE: PBT
CAP: PBT
ACTUATOR: PBT
INTERNAL SEAL: Silicone rubber
TERMINALS: Copper with silver nickel inlay, silver plating
MOVABLE CONTACT: Copper alloy, gold over silver plating
TERMINAL SEAL: Epoxy
Operating Environment
OPERATING TEMPERATURE: -55˚C to +105˚C
ESD PROTECTION: 15KV min.
Process Environment
SEALING: IP68
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, please contact Customer Service.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box.
NP
8
Designation
NP NP Series
Operating Force
8
8 Newtons
Actuator Style
S
Standard
E
Extended (D housing style only)
* Please contact
Customer Service
for additional colors.
Actuator Color*
2
Black (STD)
3
Red
4
Orange
5
Yellow
9
Gray
Housing Style
T
Standard threaded mount
L
Long threaded mount
S
Slot mount
R
Rear mount
D
Dome bezel
P
Tapered bezel
E
Terminal Seal
E
Epoxy
All models are epoxy sealed
Contact Material
Q
Silver (STD)
G
Gold over silver
Termination
03 Solder Lug (STD)
02 PC Pin (G Contact Material)
W4 4x 12” 22 AWG UL1569 wire (overmolded)
W3 3x 12” 22 AWG UL1569 wire (overmolded)
Housing Anodizing Color
1
Clear anodized
2
Black anodized (STD)
A-118
Specifications and dimensions subject to change
www.ck-components.com