MPS Datasheet, PDF (1/5 Pages) RUBYCON CORPORATION – METALLIZED POLYPROPYLENE FILM CAPACITORS

Features/Benefits
• Long life—4M operations
• Sealed contacts
• Quality construction
• Quick and easy installation
MPS Series
Magnetic Proximity Sensors
Typical Applications
• Automotive sensors and indicators
• Industrial sensors
• Factory automation equipment
Specifications
Materials
CONTACT RATINGS: 3.0 W max. @ 30 V DC or 30 V AC max. @
0.3 AMP max.; 1.0 msec. max. operate time (including bounce);
1.0 AMP max. carry current.
CONTACT RESISTANCE: 100 m Ω max. initial.
DIELECTRIC STRENGTH: 200 V DC min.
ELECTRICAL CIRCUIT: SPST NO (Contact Form A). Reed switch
opens when magnet is removed from proximity. Contacts are
held closed when magnet is within actuation range.
OPERATING TEMPERATURE: -40°F to 212°F (-40°C to 100°C).
OPERATING DISTANCE/ALIGNMENT: Operate (pull-in or make)
points are nominal values with ± 10% tolerance. Release points
are 110% to 150% of the operating points.
MECHANICAL & ELECTRICAL LIFE: 4 million operations.
PACKAGING: Bulk packaging, 10 switch and magnet pairs
per package.
HOUSING/SPACER/COVER: ABS plastic (UL94V-0), white.
REED SWITCH: Rhodium coated reed contacts in hermetically
sealed, nitrogen filled glass capsule. Closed when magnet is in
close proximity. Used in closed loop circuits.
WIRE LEADS: UL 1061, 22 AWG wire: stranded, made of copper or
aluminum; Length: 12 in. with ends stripped; Color: white.
POTTING (around wires): Epoxy.
MAGNETS:
MPS45WGW: NdFeB
MPS80WGW: Ceramic Ferrite 8
All other models: Alnico V
ADHESIVE MOUNTING: Foam-backed, pressure-sensitive adhesive
with release liner (MPS45WGW model only).
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
How To Order
Complete part numbers for MPS Series Magnetic Proximity Sensors are shown on pages E-35 thru E-39.
PART
NUMBER
MPS45WGW
UL 61058-2
SWITCH TYPE
Subminiature surface mount (adhesive
or flange), side exit leads, 1" make gap.
E
OFFSET OF CENTERLINES AND DISTANCE BETWEEN
FACES OF SWITCH AND MAGNET (INCHES).
ACTUATION CHART
NOTE: UL 61058-2 Rating
SWITCH
E–35
MAGNET
Third Angle
Projection
Dimensions are shown: mm
Specifications and dimensions subject to change
www.ck-components.com