LP22C21T203DQ Datasheet, PDF (1/3 Pages) C&K Components – Miniature Snap-in Slide Switches

LP Series
Miniature Snap-in Slide Switches
Features/Benefits
• 6 to 11 AMPS available
• Easy assembly—Snap-in mounting
• Contamination resistant—extended actuator
• Positive detent
• RoHS compliant
Typical Applications
• Small appliances
• Outdoor appliances
• Portable tools
Models Available
Specifications
Materials
CONTACT RATING: Q contact material (LP0X, LP2X Models: 6 AMPS HOUSING: 6/6 nylon (UL94V-2), black.
@ 125 V AC or 28 V DC; 3 AMPS @ 250 V AC (UL/CSA).
ACTUATOR: Glass filled acetal, UV and petroleum resistant,
I
(LP7X, LP8X Models): 11 AMPS @ 125/250 V AC (UL/CSA).
black.
See page I-27 for additional ratings.
CONTACTS: Q contact material: Copper, silver plated. See page
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
I-27 for additional contact materials.
INSULATION RESISTANCE: 109 Ω min.
TERMINALS: Q contact material: Copper, silver plated. See page
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
I-27 for additional contact materials.
CONTACT RESISTANCE: Below 10 m Ω typ. initial
@ 2-4 V DC, 100 mA, for both silver and gold plated contacts.
OPERATING TEMPERATURE: -30ºC to +65ºC
CONTACT SPRING: Music wire or stainless steel.
TERMINAL SEAL: Epoxy.
STORAGE TEMPERATURE: -30ºC to +85ºC
NOTE: Any models supplied with Q, B or G contact material are RoHS compliant.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages I–26 and I–27. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
LP22 DPDT, 6 AMP
LP02 SPDT, 6 AMP
LP81 DPST, 11 AMP
LP82 DPDT, 11 AMP
Actuator
C2 Black cap
C1 Whitecap
C3 Red cap
Detent
1 With detent
Mounting Style
T2 Snap-in panel with tabs
(D, L, N markings only)
Terminations
03 Solder lug with hole
Housing Markings
NONE No markings
D ON-OFF
Contact Material
Q Silver
B Gold
I–25
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com