LCS Datasheet, PDF (1/4 Pages) C&K Components – Subminiature Sealed Snap-acting Switches

LCS Series
Subminiature Sealed Snap-acting Switches
Features/Benefits
• Compact design
• Long life and high electrical capacity
• Quick connect, solder terminals,
PC terminals, wire leads
• Wide variety of actuator styles
• RoHS compatible, RoHS compliant
• IP67
Typical Applications
• Motorized equipment
• Sump pump
• Thermostatic controls
• Computers
• Air conditioners
14
Models Available
Specifications
CONTACT RATING: 6 AMP, 250 V AC and ¹⁴
5 AMP, 125/250 V AC
0.1 AMP, 125/250 V AC
ELECTRICAL LIFE: 10,000 cycles
INSULATION RESISTANCE: 100 M ohm min.
DIELECTRIC STRENGTH: 1,000 VAC
OPERATING TEMPERATURE:
0ºC to +120ºC (without wire)
0ºC to +85ºC (with UL1007 wire)
0ºC to +105ºC (with UL1015 wire)
J
0ºC to +105ºC (with UL1430 wire)
0ºC to +80ºC (with UL1061 wire)
0ºC to +120ºC (with UL1330 wire)
OPERATING FORCE: (see ACTUATOR’S option sections).
MOUNTING: 2-56 screws, torque 2.3 in/lbs max.
Materials
SWITCH HOUSING: Thermoplastic polyester or high temperature
thermoplastic (PTS) (UL 94V-0).
ACTUATOR BUTTON: Thermoplastic polyester.
SPRING: Copper alloy.
PIVOT: Copper alloy.
MOVABLE CONTACTS: Silver nickel
STATIONARY CONTACTS: Silver nickel on copper alloy.
TERMINALS: Copper alloy.
ACTUATOR LEVEL: Stainless steel.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages J-27 thru J-29. For additional options not shown in catalog, consult Customer Service Center.
Series
LCS
Contact Rating
05 5 AMP, 125/250 V AC
6 AMP, 250 V AC
01 0.1 AMP, 125/250 V AC
LCS
14 _{Operating Force}
1 150 grams
2 203 grams
Actuator
P00 Pin plunger
T00 11.9 mm short lever
T05 17.4 mm short lever
T07 19.4 mm short lever
T13 25.5 mm lever
T19 33.3 mm lever
T28 40.7 mm lever
T43 55.9 mm lever
S26 18.6 mm simulated lever
A05 17.2 mm lever roller
Terminations
S Solder
Q 0.110 Quick Connect
P PC Thru Hole
W Wire leads potted
Z Wire leads non-potted
J–26
Circuitry
C SPDT
W SPST N.C.
Y SPST N.O.
Wire Type AWG
20 20 AWG
22 22 AWG
24 24 AWG
26 26 AWG
28 28 AWG
30 30 AWG
Wire UL #
(when required)
A UL1007
B UL1015
C UL1430
D UL1061
E UL1330
Wire Side (when required)
A Wire out the bottom
B Wire out the right side
C Wire out the left side
D None
Dimensions are shown: mm
Specifications and dimensions subject to change
www.ck-components.com