L101 Datasheet, PDF (1/6 Pages) C&K Components – Miniature Slide Switches

L Series
Miniature Slide Switches
Features/Benefits
• Positive detent
• Enclosed housing
• Maintained and momentary functions
• PC and panel mounting
• RoHS compliant
Typical Applications
• Communications equipment
• Lighting devices
Models Available
Specifications
Materials
CONTACT RATING: Q contact material (LX0X, LX1X Models): 4 AMPS HOUSING: 6/6 nylon (UL94V-2), black.
@ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC; 0.5 AMP @
ACTUATOR: 6/6 nylon (UL94V-2), black.
I
125 V DC (UL). See page I-23 for additional ratings.
‘13’ actuator, natural (standard).
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
CONTACTS: Q contact material: Copper, silver plated. See page
CONTACT RESISTANCE: Below 10 m Ω typ. initial
I-23 for additional contact materials.
@ 2-4 V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109 Ω min.
TERMINALS: Q contact material: Copper, silver plated. See page
I-23 for additional contact materials.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
CONTACT SPRING: Music wire or stainless steel.
OPERATING TEMPERATURE: -30ºC to +65ºC
TERMINAL SEAL: Epoxy.
STORAGE TEMPERATURE: -30ºC to +85ºC
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
NOTE: Any models supplied with Q, B or G contact material are RoHS compliant.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages I-20 through I-24. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
L202 DPDT
Actuator
L203 DP3T
01 .200" high
L101 SPST
02 .335" high
L102 SPDT
03 .375" high
L103 SP3T
05 .312" high
L104 SP4T
11 .100" high
L112 SPDT, mom.
12 Screwdriver slot
L113 SP3T, mom. to one end _{13 Plunger without cap}
L123 SP3T, mom. to both ends _{14 Plunger with .200" dia. cap}
L201 DPST
15 Plunger with .310" dia. cap
L204 DP4T
17 Plunger with .458" dia. cap
L212 DPDT, mom.
19 Plunger with .590" dia. cap
Detent
1 With detent
2 Without detent
Mounting Style
MS PC Thru-hole
MA Right angle, PC thru-hole
ML Right angle, PC thru-hole
MV Right angle, PC thru-hole
SS Panel with mounting ears
TS Panel with integral mounting ears
Terminations
02 PC Thru-hole
01 Solder lug with notch
03 Solder lug with hole
04 PC Thru-hole
10 PC Thru-hole
06 Wire wrap
12 PC Thru-hole
Contact Material
Q Silver
B Gold
G Gold over silver
Seal
NONE No seal
E Epoxy seal
Cap Color
2 Black
NONE No cap
I–19
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com